[low_bass_makker]

Originally Posted by navin

LBM, I have not asked for a pair.

i did not meant it for you SIR

Originally Posted by navin

put these in your doors and the 4" in your dash feed the 4" via a bass blocker and you might have a nice system. dont know if the 6" will boom in your doors though.

I have tried it in my brother`s santro very good results are achived....with a 4 inch driver in the dash 6.5 in the door and the tweeter on the dash...with the 4 inch used with bass blocker.....good results....

[navin]

Originally Posted by Sam Kapasi

Navin, you would not get a decent pair of bookshelf speakers for less than 15-20Kd.

DALI Concept, Epos ELS3, Mordant Short 902/912, Wharfdale Diamond (ok these are too bright), B&W 303, etc...still I propose that those you are interesed in learning a bit please to use this opportunity.

[Sam Kapasi]

Originally Posted by navin

DALI Concept, Epos ELS3, Mordant Short 902/912, Wharfdale Diamond (ok these are too bright), B&W 303, etc...still I propose that those you are interesed in learning a bit please to use this opportunity.

None of these will cost 10K navin, not to customers.

[kkr2k2]

Originally Posted by navin

what is HARD bass?

no idea....
had to some-how express the kind of sound i like.

Originally Posted by kkr2k2

its all like greek and latin to me.
how should i let you know what i want... , i like the bass to be hard not soft.(not sure, hard and soft is a right description).

how about this, i have a pio DEH7450MP, HU with rear pio 300W co-axials. and 100W in the front. I like the bass produced by the rear ones with max loud setting in the HU.

so where does this hard bass sound lie in??? in between 20 and 40 Hz or 35Hz.

[kb100]

Originally Posted by navin

a) Which Peerless
b) I assume this is 18mm. I hope it is well braced. 18mm MDF over 6.5 feet is rather flexible
c) I assume they are three quarter wave tranmission lines (not tubes) - why did you use this alignment?
d) No pics?
e) You can build 3 (rear and center). Keep center away from a CRT TV.

a) the old school ones - there was this guy who was able to get me some from their Bombay plant while that collaboration was still alive - I dont remember the exact model number etc thought - it was about 8.5 years back!

b) .. It is solid .. the width is about 12 inches.
c).. yes its is the three quarter wave transmission line - over time got used to calling them "tube" to keep the explanations to a minimum. I had a friend who had done his masters and discontinued his Phd in Acoustic Engineering from the US - this was his idea - I toh went for the BLING effect!! He designed the whole thing using TS parameters, Oscilloscope and all!! This time arouind I am going to keep it simple - the folded version of the same so we have a regular looking set ! (Plus wife will kill me if I get myself another pair of them trannies!
d) I will put up pics - but as soon as the connectivity issues at my new house are sorted out!
e) well then Sam I need THREE NUMBERS... SAM??

EDIT: But shielding - can one DIY and shield the Centre speakers?.. the reason I ask is the main speakers are currently about 6 feet away from the TV and YET I have distortion - is this cause the magnets are that powerful??

[nitrous]

put these in your doors and the 4" in your dash feed the 4" via a bass blocker and you might have a nice system. dont know if the 6" will boom in your doors though.

Thank U.
Ill do as u say.Now, those woofers would be better in the enclosure than the doors. Must be worth the extra money.

[kooldude]

Sam can i please have a pair
Why i want them the reason is recently some bugger broke into my car and stole everything from the mp3 player to the components to the rear speakers.So am totally broke now and just left with the panel so got a second hand system and am left widout speakers
Yes i promise you 3 or 4 beers and i shall also gift you a zippo lighter

[Joz]

Sam, this thread reminds me of how Nicholas Cage emptied a plane full of arms in a couple of minutes. That sale was also for free!! What are you upto?

[esteem_lover]

Sam is the Lord of Audio.

[Mad Monkey]

Originally Posted by Mad Monkey

hmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm

would it possible to build something like a water resistant enclosure for theese ?

OYE !!
no Answer ???

Me want a pair for my rowing boat !
seriously .
will take you rowing in it sam and also feed you paani puri in it .
you can choose teekha ya meetha

[Sam Kapasi]

Monkey, the speakers are not marine man. You get different marine speakers. These won't last you long at sea.

[binz]

Um,i have these kenwood speakers about two 1 foot high in my room.The middle ball like part of the big circular speaker was pushed in when i was a kid(not that im big now but still)...would these speakers work.There are three circular speakers things,on is 1" one is 1.5" and the other is 6.5"...wat do ya think??

ITs a DIY thingy...i would have to ripp open the enclosure..and get it back together...could i get a pair?

[muni]

@sam:

I want to improve the front sound stage for the low frequencies which at the moment is coming from the 12 Inch Sub in the swift hatch Back boot.


Is it possible to use them on the doors along with the infinity reference speakers i already have. I am willing to spend a few Ks on this.

I want the front doors to handle more bass!!


Ever since i heard the car audio system in Skoda Laura, i am in love with what they have done with all those speakers in all the doors. It feels more rounded.

Is it possible to get this on the swift, If yes please let me have them

[revtech]

Originally Posted by Mad Monkey

Me want a pair for my rowing boat !
seriously .

dude you have a rowing boat ?? are you serious

[Sam Kapasi]

Have also found 3 or 4 pairs of 5.25" drivers.