[iamback]

Originally Posted by ghpk

thanks for help,
i need 12v to 3.6 volts to drive a 1 x 0.75 watt poly watt L.E.D.

for high power one, will let you know once i decide on which one to use exactly.

for 12V use this WIRELESS HIGH POWER 6 AMP REMOTE CONTROL KIT CAR/12V : eBay Motors (item 350062399455 end time May-10-10 21:27:41 PDT)

Using this product you can turn any 12V device on and off from remote.

[shyamhegde]

Thanks iamback for giving link to a good LED shop on ebay.in . That is a the decent collection form online shop who ships from India.

Originally Posted by ghpk

thanks for help,
i need 12v to 3.6 volts to drive a 1 x 0.75 watt poly watt L.E.D.

for high power one, will let you know once i decide on which one to use exactly.

Useing 2 LEDs in series and a current limiting resister looks cheapest option for you. If you use 2 LEDs, power disspated on resister as heat will be less and you get more overall light. Also can looking at using a simple constant current circuit around LM317 . The constant current source modules costing Rs.650 upwards are quite expensive on a DIY project i feel.

[gopinathann]

Recently I bought LED stuffs from ebay and fixed.
LED Strips and Blue SMD Fog lights.

Originally Posted by anantnehru

I dont know if that was asked in a good way or a bad way, but this is what I got done to my car yesterday. Not such a good picture, but think you guys will get the idea.
(Pic is with the parking lights on, for some reason looks like normal lights - maybe didnt have camera on right setting, but it was on night mode)

Attachment 61510

[thedreamcatcher]

Is the Blue fog lights now purely for show or does it help in visibility. Does not seem to have too much throw though

[gopinathann]

Originally Posted by thedreamcatcher

Is the Blue fog lights now purely for show or does it help in visibility. Does not seem to have too much throw though

Just for show, there is no use for fog lights in Chennai.

[greenhorn]

gphk - check these out
DealExtreme: $2.34 MR16 1*1W 320~350mA Constant Current Regulated LED Driver (8~40V Input)

cheaper, and more options available. search at that site...

[abhipuru16]

Hi!
I would like to change the cabin light in my Zen to white LED's. I want to get maximum light inside the cabin with this DIY. Can somebody guide me please as to what all I require for this? What "mm" LED's and all?

How many LED's and of what specs?

Price is not an issue.

[abhipuru16]

I am thinking of using 12 white LEDs 3 in parallel with 1 56ohm resistor for three LEDs. Is it suitable? I want very bright leds, would this suffice?

[greenhorn]

there is an entire thread on it started by benny. go through it

http://www.team-bhp.com/forum/modifi...leds-ikon.html

[sathyaprakash]

Originally Posted by nandans2005

guys,

is there any LED options for the ANHC. Would you guys help me with this information please.

Can anyone who have done LED modifications in ANHC please post your experience and photos thank you

[sathyaprakash]

Post deleted by the Team-BHP Support : Please do NOT post one-liners that add little or no informational value to the thread. We need your co-operation to maintain the overall quality of this forum.

Please read our rules before proceeding any further.

[overboost!]

I Really want to get White LEDs in my OHC's Interior dome light but have no clue about electronics, where could i get a 6 or 8 LED set up made? Please help.

[gopinathann]

Originally Posted by overboost!

I Really want to get White LEDs in my OHC's Interior dome light but have no clue about electronics, where could i get a 6 or 8 LED set up made? Please help.

Try ebay
http://compare.ebay.com/like/130399532906

[torque.steer]

hey got these LEDs fit on my headlight !!! (MARUTI ESTEEM)

[S.I.N.G.H]

hi folks. here is a small circuit i made in my free time. we can term it as 'police lights'.

YouTube - 12072010.mp4

note: this is not a means of disrespecting the law by any means.
for any help, please feel free to PM me.