OBD (On-board diagnostics) for Indian Cars

Dr.Naren · 21st February 2016, 02:55

Quote:

Originally Posted by a4anurag

I have set it at MAF.

Attachment 1477674

I'll try out to compare to see if there is difference in data if set by MAP (default) and MAF.

Did you check using both MAP and MAF method? In my SX4, values were same in both methods. But in MAP method, boost gauge changes to Vacuum after max boost(which should never happen in a diesel car). Also what is the max boost in your Swift?
Thanks

a4anurag · 21st February 2016, 03:19

Quote:

Originally Posted by Dr.Naren

Did you check using both MAP and MAF method?

Yes I have done in my Swift though.

Quote:

Originally Posted by Dr.Naren

In my SX4, values were same in both methods.

The values are slightly different when both methods are compared.

Quote:

Originally Posted by Dr.Naren

But in MAP method, boost gauge changes to Vacuum after max boost (which should never happen in a diesel car).

In my Swift and Ertiga it remains in Boost status. Doesn't change to Vacuum.

In my Alto K10, it is Vacuum gauge.

Quote:

Originally Posted by Dr.Naren

Also what is the max boost in your Swift?

16.9 psi. Remember seeing 17.5 psi too.

virgopal · 23rd February 2016, 07:59

Samsung's new car dongle enables drivers to monitor vehicle's performance
New Delhi, Feb.22 (ANI): South Korean multinational conglomerate Samsung Electronics Co Ltd has unveiled a car dongle which provides a way for owners of older cars to add LTE(Long-Term Evolution)wireless connectivity to their vehicles.

The Samsung Connect Auto dongle plugs into a car's OBD II diagnostic port and enable drivers to monitor their vehicle's performance as well as locate it. It also acts as a Wi-Fi hotspot in the vehicle, the Verge reported.

Samsung has not disclosed the price of the Connect Auto but the device is expected to be available for sale in the second quarter of this year. (ANI)
http://www.aninews.in/newsdetail7/st...rformance.html

srinivasnvns · 4th March 2016, 16:06

Just checking to see if anyone participating on this thread has come across or used the product mentioned below in India.

https://www.automatic.com/adapter/

-Srinivas

ravigop · 14th March 2016, 18:27

I need a scan tool to fix "Check Engine Light (CEL)" in my car (swift 2005). Can somebody let me know which scan tool will work ? I hear that Autosnap IN 815 works well with Indian cars but unfortunately i can find any place that sells this. Can someone lend me temporarily this atleast for some time so that i can fix my car ?

a4anurag · 14th March 2016, 19:15

Quote:

Originally Posted by ravigop

I need a scan tool to fix "Check Engine Light (CEL)" in my car (swift 2005). Can somebody let me know which scan tool will work?

IMO yours being a 2005 model Swift, is it a OBD 2 compliant? I am not sure if it is. Hence check with MASS once.

SuperFlyBoy · 2nd April 2016, 19:35

Quote:

Originally Posted by mercedised

What device/cable tobe used for Tata Safari Dicor 3.0L?

Quoting an old post, but still interested for my Dicor 3.0 as well - anyone know whether Torque Pro would work with this SUV?

johannskaria · 2nd April 2016, 19:53

Bought a BAFX Products 34t5 Bluetooth OBDII Scan Tool for Android Devices on amazon.com. Planning experiments!

OBD (On-board diagnostics) for Indian Cars-capturebafx.jpg

GreyAsta · 28th April 2016, 22:06

Quote:

Originally Posted by SuperFlyBoy

Quoting an old post, but still interested for my Dicor 3.0 as well - anyone know whether Torque Pro would work with this SUV?

Hi! I've been using the Torque Pro app since 2 months now. It works with all cars which are OBD 2 compliant and manufactured post 2010. If your Safari Dicor meets these requirements, it should work.

SuperFlyBoy · 28th April 2016, 22:12

Quote:

Originally Posted by GreyAsta

Hi! I've been using the Torque Pro app since 2 months now. It works with all cars which are OBD 2 compliant and manufactured post 2010. If your Safari Dicor meets these requirements, it should work.

Dicor 3.0, year 2005 build, but model year 2006.

a4anurag · 28th April 2016, 22:38

Quote:

Originally Posted by SuperFlyBoy

Dicor 3.0, year 2005 build, but model year 2006.

OBD 2 is post 2009 so your car may not be compatible.

five46 · 29th April 2016, 23:27

Quote:

Originally Posted by audioholic

Only the Alto K10 has OBD compatiblity.

Quote:

Originally Posted by a4anurag

Post 2009 things will work.

Do not know if it works in general for all post 2009 Alto cars, but in Alto 800, it does. I tried it.

Also, if anyone can help me what does this 'incomplete' mentioned against Catalyst mean?

OBD (On-board diagnostics) for Indian Cars-torque-screenshot-1.jpg

And can someone please explain what can these 14 other faults be?

OBD (On-board diagnostics) for Indian Cars-torque-screenshot-2.jpg

vdm295 · 29th April 2016, 23:54

Quote:

Originally Posted by five46

And can someone please explain what can these 14 other faults be?

You have a faulty OBD II device. Kindly talk to the person from whom you have bought the device and get it changed.

audioholic · 30th April 2016, 09:27

Quote:

Originally Posted by five46

Also, if anyone can help me what does this 'incomplete' mentioned against Catalyst mean?

As per OBD2 standards this is one of the few tests that are run to check the status of the emission control system. Need not worry about this. As long as there are no DTC present, your car is good to go.

tharian · 6th May 2016, 14:57

Encountering an issue with my Torque Pro app since few days.

It is a full version and has been working fine since 2 years and is used on a daily basis.

Few days back I turned it on to see the 'profile not found' blinking. The profile was set to my car with all the details entered. I thought I may have accidentally deleted and set it again only to find it removed again the next time.

Has anyone experienced the same and is there an update available to fix the same?

23rd February 2016, 07:59	#1233
virgopal BHPian Join Date: Feb 2008 Location: Bangalore,Mysor Posts: 244 Thanked: 120 Times	Re: OBD (On-board diagnostics) for Indian Cars Samsung's new car dongle enables drivers to monitor vehicle's performance New Delhi, Feb.22 (ANI): South Korean multinational conglomerate Samsung Electronics Co Ltd has unveiled a car dongle which provides a way for owners of older cars to add LTE(Long-Term Evolution)wireless connectivity to their vehicles. The Samsung Connect Auto dongle plugs into a car's OBD II diagnostic port and enable drivers to monitor their vehicle's performance as well as locate it. It also acts as a Wi-Fi hotspot in the vehicle, the Verge reported. Samsung has not disclosed the price of the Connect Auto but the device is expected to be available for sale in the second quarter of this year. (ANI) http://www.aninews.in/newsdetail7/st...rformance.html
	(1) Thanks

4th March 2016, 16:06	#1234
srinivasnvns BHPian Join Date: Nov 2015 Location: Hyderabad Posts: 55 Thanked: 195 Times	Re: OBD (On-board diagnostics) for Indian Cars Just checking to see if anyone participating on this thread has come across or used the product mentioned below in India. https://www.automatic.com/adapter/ -Srinivas
	() Thanks

14th March 2016, 18:27	#1235
ravigop BHPian Join Date: Oct 2007 Location: Bangalore Posts: 110 Thanked: 31 Times	Re: OBD (On-board diagnostics) for Indian Cars I need a scan tool to fix "Check Engine Light (CEL)" in my car (swift 2005). Can somebody let me know which scan tool will work ? I hear that Autosnap IN 815 works well with Indian cars but unfortunately i can find any place that sells this. Can someone lend me temporarily this atleast for some time so that i can fix my car ?
	() Thanks

2nd April 2016, 19:53	#1238
johannskaria BHPian Join Date: Jul 2013 Location: MH 12 / KL 08 Posts: 795 Thanked: 2,105 Times	Re: OBD (On-board diagnostics) for Indian Cars Bought a BAFX Products 34t5 Bluetooth OBDII Scan Tool for Android Devices on amazon.com. Planning experiments!
	() Thanks

6th May 2016, 14:57	#1245
tharian Senior - BHPian Join Date: Dec 2011 Location: SBC Posts: 3,986 Thanked: 8,040 Times View My Garage	Re: OBD (On-board diagnostics) for Indian Cars Encountering an issue with my Torque Pro app since few days. It is a full version and has been working fine since 2 years and is used on a daily basis. Few days back I turned it on to see the 'profile not found' blinking. The profile was set to my car with all the details entered. I thought I may have accidentally deleted and set it again only to find it removed again the next time. Has anyone experienced the same and is there an update available to fix the same?
	() Thanks