[Sourav1598]

Originally Posted by Mr.Sleeper

2008 Swift Dzire Instrument Cluster Upgrade

I think you need to check for the signal for the RPM in a Brown coloured wire. If the same is present in your stock wiring, a direct swap is possible (which I doubt). Else, you would have to make a connection from the wiring present under your dashboard (consult a technician) from the Brown coloured signal wire and make a connection to your new speedometer (with the tachometer)!

[Venue5366]

Hello

I have a swift 2013 vdi. Currently i have a Jvc lcd head unit. I want to change my head unit, but im more into oem units than android ones. Will i be able to retrofit any maruthi oem head unit which have carplay and android auto. If yes, what do they generally cost if u have any idea.

Thank in advance

[Ashtoncastelino]

Originally Posted by Venue5366

Hello
Will i be able to retrofit any maruthi oem head unit which have carplay and android auto.

You can check for the Ertiga ( 2015-2017 ) ZXi+ / ZDi+ Variant headunit. It is a bosch one with native android auto and Carplay. Directly Plug and Play with your car since the Stereo fascia is also the same. Should be able to source this in the price range of 5k to 8K mark

Regards
Ashton Castelino

[Ashtoncastelino]

Originally Posted by Mr.Sleeper

Hey guys I own a 2008 Swift LDI, it comes with a bland looking speedometer without tachometer(images attached). The VDi and ZDi models come with chrome bezels and inbuilt tachometer, can a swap be possible. ]

For the LDi variants , I've seen that swaping the meter directly to VDi without any wiring change / mod works perfectly and the RPM also works due to CanBus wires.

Try it out and let us know.

Regards
Ashton Castelino

[Ashtoncastelino]

Originally Posted by Sourav1598

BTW, I did install the Dashboard Monitor display with the ambient temperature readings & FE. However, to my dismay, the reading are not showing up for FE & Ambient Temperature.

Could you confirm if the pin connector of the clock in stock has the BCM wiring inputs already present in the Vxi model of K12 Swift ? Also, the part number which you had shared 34600-63J03 is different from mine which is 34600-62J51.

Is it the compatibility of the Monitor with my BCM or the missing wiring connection from the BCM to your understanding?

Okay so I believe you need to change the BCM to a Dzire BCM (VXi or ZXi ) will do. G13B BCM and K12M BCM are crosscompatible. Change it and you should see the clock working. But again your clock part number is different, that could also be the case. Just make sure to plug in the SDT ( Suzuki Diagnostic Tool ) from MASS and see if the outside temperature is displayed in the Laptop. If yes then your BCM is reading the outside temperature from the Ambient Sensor if installed like i mentioned in my earlier posts. If the temperature is displayed then you know you have the incorrect clock and need to source a different one similar to what i got. Notice yours has a different backlight as compared to what i got.

Hope this helps

Regards
Ashton Castelino