Team-BHP
(
https://www.team-bhp.com/forum/)
Quote:
Originally Posted by raghu_exodus
(Post 3016495)
Are 195/60 R14 a good upgrade ?
I wonder whether they offer better grip or does the ride become too harsh.
On a tyre a upsize calculator that I used I found the difference to be more than 2% over the 185/79 R14.
|
195/60R14 is an incorrect size, while 195/60R15 is perfect upgrade size for the new ZXi/ZDi. I think it was a typo in KarthikK's post when he mentioned 195/60R14. If you want 195, only option is to go for 195/65R14 Yoko. If you are particular about XM2 on 14" alloys, 185/70R14 is the only option as per my knowledge.
Guys need your inputs on new tyres for my Swift VDi.
Currently I have 185/70 R14 Bridgestones Potenza GIII on my car. The front ones were replaced at 55K kms and now the rear ones are due replacement now, at 80,000 kms. I am not sure whether I should go for Bridgestones itself or should look at MRF ZLO or Apollo Acceleres. The new ones will go into the front wheels while the 15K done tyres will be moved to back.
My doubts are:
1. Can we mix two different brands for the front & back?
2. Can we have a mix of uni-directional tyres (Potenza GIII) and normal tyres?
The road noise on the Bridgestones are quite prominent above 80 kmph, but then I do NOT want tyres with soft side wall as well (So Michelin ruled out). The roads I usually travel thru, can be quite messy (though it's good for the time being) and I want something which can last well thru bad road conditions.
Quote:
Originally Posted by swiftnfurious
(Post 3019595)
Guys need your inputs on new tyres for my Swift VDi.
Currently I have 185/70 R14 Bridgestones Potenza GIII on my car. The front ones were replaced at 55K kms and now the rear ones are due replacement now, at 80,000 kms. I am not sure whether I should go for Bridgestones itself or should look at MRF ZLO or Apollo Acceleres. The new ones will go into the front wheels while the 15K done tyres will be moved to back.
My doubts are:
1. Can we mix two different brands for the front & back?
2. Can we have a mix of uni-directional tyres (Potenza GIII) and normal tyres?
The road noise on the Bridgestones are quite prominent above 80 kmph, but then I do NOT want tyres with soft side wall as well (So Michelin ruled out). The roads I usually travel thru, can be quite messy (though it's good for the time being) and I want something which can last well thru bad road conditions.
|
NEVER install new tyres in the front. It is a traditional mentality to install new tyres at the front but a quick google search will tell you that it is technically wrong.
1. You can but it is not advisable as grip levels and handling characteristics of the tyres will vary.
2. Theoretically you can but see my reply to 1.
If you have to buy only 2 tyres, stick to Bridgestone GIIIs. If you are ready to sell the 15k run tyres on the open market/TBHP classifieds, then go for 4 new tyres of ZLO or Acelere or whatever else your heart desires!
Quote:
Originally Posted by Nikhilb2008
(Post 3019658)
NEVER install new tyres in the front. It is a traditional mentality to install new tyres at the front but a quick google search will tell you that it is technically wrong...
|
Thanks a lot Nikhil. Found this on Youtube.
http://www.youtube.com/watch?v=gSz7cm6MwH0 Quote:
Originally Posted by Nikhilb2008
(Post 3019658)
...then go for 4 new tyres of ZLO or Acelere or whatever else your heart desires!
|
Out of ZLO / Acelere, what would you prefer? And waht could be the price difference for the same spec on these two?
Is there any website which gives the BEST possible combinations of upsizes / upgrades if we input the stock tyre size? All the sites I checked need the current tyre size & ALSO the new ones (which you plan to upsize/upgrade) and then it shows the differences. :Frustrati For a newbie, this causes so much discomfort.
Ideally, I would like a site to suggest me the best available upgrades if I input my stock tyre size.
I would personally choose MRF ZLO. Price difference between MRF and Apollo are marginal.
Finalised Z.L.O and placed an order for the tyres. While checking out the thread pattern and talking to the guy there, he mentioned an interesting point on Z.L.O! He said it's better used "like" a uni-directional tyres for BEST performance + low tyre noise. The tyres are normal (universal / bi-directional rotation capable) but he said the slanting thread pattern should be pointed inwards from both sides to direct water towards the inner under-body for grip.
He also showed me a sticker from MRF mentioning "Outside" on the side which should be placed on the outer side always. Now would NOT this make sure the outer side wears off faster? :Frustrati I am a guy who always corners the car than reduce speed at curves and it always shows on the outer walls of my front tyre! It's INTO my DNA now (can't think of changing it) & that's why I love my Swift too!
How can we ensure there is "even wear" on the tyres now? From what I understand, even the rear tyres will have the sides (outer & inner) fixed always!
Quote:
Originally Posted by swiftnfurious
(Post 3019595)
Guys need your inputs on new tyres for my Swift VDi.
Currently I have 185/70 R14 Bridgestones Potenza GIII on my car. The front ones were replaced at 55K kms and now the rear ones are due replacement now, at 80,000 kms. I am not sure whether I should go for Bridgestones itself or should look at MRF ZLO or Apollo Acceleres. The new ones will go into the front wheels while the 15K done tyres will be moved to back.
.
|
How is it 15k done? Should be 25k right?
Quote:
Originally Posted by swiftnfurious
(Post 3024994)
Finalised Z.L.O and placed an order for the tyres. While checking out the thread pattern and talking to the guy there, he mentioned an interesting point on Z.L.O! He said it's better used "like" a uni-directional tyres for BEST performance + low tyre noise. The tyres are normal (universal / bi-directional rotation capable) but he said the slanting thread pattern should be pointed inwards from both sides to direct water towards the inner under-body for grip.
He also showed me a sticker from MRF mentioning "Outside" on the side which should be placed on the outer side always. Now would NOT this make sure the outer side wears off faster? :Frustrati I am a guy who always corners the car than reduce speed at curves and it always shows on the outer walls of my front tyre! It's INTO my DNA now (can't think of changing it) & that's why I love my Swift too!
How can we ensure there is "even wear" on the tyres now? From what I understand, even the rear tyres will have the sides (outer & inner) fixed always!
|
From what I've heard, slanting tread pattern pointing inwards on both sides would make the side marked "Outside" actually come on the inside sidewall for one side since they do not have separate left side and right side tyres.
Controversial tread pattern of ZLO has been discussed in the ZLO thread, from Pg 3 or so.
http://www.team-bhp.com/forum/tyre-a...-tyres-15.html
I don't remember how the discussion concluded though. Its an interesting read, especially when you are planning to get ZLO. :)
Quote:
Originally Posted by zenren
(Post 3025058)
...Controversial tread pattern of ZLO has been discussed in the ZLO thread, from Pg 3 or so. http://www.team-bhp.com/forum/tyre-a...-tyres-15.html
I don't remember how the discussion concluded though. Its an interesting read, especially when you are planning to get ZLO. :)
|
Read thru the entire thread last night (or early morning?!)! There is NO definite conclusion as such, but the users are quite happy with the tyres. So I guess, I will give it a try. :)
Quote:
Originally Posted by swiftnfurious
(Post 3025117)
Read thru the entire thread last night (or early morning?!)! There is NO definite conclusion as such, but the users are quite happy with the tyres. So I guess, I will give it a try. :)
|
Good luck. How much did it cost?
Looking forward to your feedback on wet weather performance of ZLO.
Quote:
Originally Posted by zenren
(Post 3025129)
Good luck. How much did it cost?
Looking forward to your feedback on wet weather performance of ZLO.
|
Will be mostly buying it today. Here I have posted the entire stage 1 experience. Please do have a look. I have posted the prices of other brands too! :)
http://www.team-bhp.com/forum/long-t...ml#post3024985
We will have to wait for the wet performance for a long time - but will definitely update. With the feedbacks / discussions, I am likely to be more cautious during the rains. But the guy in the shop said this has terrific wet grip!
Guys,
I am a big zilch when it comes to tyre knowledge.I know a lot about cars though...Methinks:D
Anyway, my Swift VXi, which has given me company since Jan 2006, needs tyre change. It has 15 inch alloys and currently wears Bridgestone Ponteza 195/R 60 I think.
What would be the right size and fit for it? Pleas ealso suggest a few good tyres. I don't want:
1. Anything on the expensive side. The car is already 7 yrs of age. I want something that is easy on the wallet. I am not brand conscious in tyres I guess (I am not buying a BMW here:D)
2. Anything that makes the already harsh ride harsher.
Quote:
Originally Posted by Abhi_Automobile
(Post 3036557)
Guys,
Anyway, my Swift VXi, which has given me company since Jan 2006, needs tyre change. It has 15 inch alloys and currently wears Bridgestone Ponteza 195/R 60 I think.
What would be the right size and fit for it? Pleas ealso suggest a few good tyres. I don't want:
|
195/60/R15 would be the ideal choice. There are may brands to choose from. I personally like Yokohama since it satisfies all my expectations. Excellent grip, relatively less road noise and long life. My first lasted 45k kms and had 5k of life left. A bit expensive when compared to other brands. Always check the tyre manufacturing date before you buy. Anything less than 1 year from the manufacturing date would be fine.
Quote:
Originally Posted by Abhi_Automobile
(Post 3036557)
Guys,
1. Anything on the expensive side. The car is already 7 yrs of age. I want something that is easy on the wallet. I am not brand conscious in tyres I guess (I am not buying a BMW here:D)
2. Anything that makes the already harsh ride harsher.
|
Quote:
Originally Posted by naveen.raju
(Post 3036918)
195/60/R15 would be the ideal choice. There are may brands to choose from. I personally like Yokohama since it satisfies all my expectations. Excellent grip, relatively less road noise and long life. My first lasted 45k kms and had 5k of life left. A bit expensive when compared to other brands. Always check the tyre manufacturing date before you buy. Anything less than 1 year from the manufacturing date would be fine.
|
If Yokohama, and it is 60 profile as I see, try the C.Drive. Great wet grip and cushy ride.
Quote:
Originally Posted by zenren
(Post 3011161)
I'm yet to see a good explanation mentioning the difference between a 'J' rim and a 'JJ' rim.
|
"J" and "JJ" denote the codes for rim
flange
Ref #3 in
this post, to get some visual perception.
Then look at
this post to see implications of flange height variation on the tyre bead size.
Then finally look at
this post, to see the actual flange dimensions corresponding to "J", "JJ", etc.
| All times are GMT +5.5. The time now is 11:38. | |
