ARTICLE: How to modify a diesel car for more performance

Rough Square · 18th January 2008, 18:11

[

Quote:

quote=ironager;371661]Mods iv installed in a Tavera 2.5l turbo
1. K&N Performance Air Filter.
2. Intake Charger
3. Intercooler
4. Double Surbo
5. Michelin Energy tyres
6. Free Flow Exhaust

Performance increases
1. Top Speed- 160
2. 0-100- 16 secs
3. 0-120- 28 secs
4. Smoother ride and handling

[/quote]

Can someone tell me where I could get these modifications done in Bangalore? Also can someone tell me - where would be the most ideal position for an intercooler in a Bolero DI.

nitrous · 18th January 2008, 18:27

Pete's is just a distributor of PSI motorsports powerboxes from europe.
Peter should be so happy his name is all over the forum and country.Lol!

crazyforspeed · 18th January 2008, 20:44

Thanks for the update. Then can anyone suggest if there is any other option(that is other than pete) to improve the performance of the indica turbo.

BUSA · 18th January 2008, 20:54

Quote:

Originally Posted by nitrous

Pete's is just a distributor of PSI motorsports powerboxes from europe.
Peter should be so happy his name is all over the forum and country.Lol!

Not exactly. The Innova is not sold in Europe AFAIK but you get boxes for them. Actually any Toyota/Honda/Hyundai/Fiat/Mercedes/BMW/Skoda/Suzuki diesel cars and there are tunning boxes for them. With Tata the gearbox wont be able to handle, and even Tata seems to agree by restricting the Dicor series to similar power and torque as the non-Dicor series

NOS Power · 19th February 2008, 07:36

Discussions here mostly center around the pete's tuning box for new age diesels.

I would like to know for e.g. how would one be able to extract a good amount of power from say the Tata 1948 cc NA diesel that sits in the sumo/old sierra etc.
Things like turbo, intercooler, CAI, FFE are fine but is there any possibility of altering any electronics to get more out of the engine.

Also other than the OE turbo that comes in the turbo sumo is it possible to fit a bigger turbo to push power over 100 BHP?

19th February 2008, 11:34

@crazyforspeed and NOS Power
you could try and build yourself a propane kit. it will help with boost,turbo will spool up faster, horsepower and torque will increase and so will mileage. it has been discussed on the earlier pages of this thread.

krish69 · 19th February 2008, 13:44

Hi All,
planning to install a Pete's box in my laura...only thing i read was that you have to use regular diesel vs. turbojet etc. Why is that? In my mind that should work even better..Cheers

lganimys · 23rd June 2008, 17:56

Hi Guys:

Below is a fantastic link from where you can get super chargers and turbo chargers for your engines. Probably all models. The company is located in Bangalore.

They even sell VTT chargers.

Preusse India Pvt Ltd., Turbo Chargers, Super chargers, Gears, Gear Drivfes and Gear Boxes, Nox MAster System, Sonic Carburator

Best

Ganesh Laxmanmurthy

manipal · 23rd June 2008, 20:53

I have been using IOC xtrapremium diesel since day one in my Indica turbo, my car has covered 30000 kms without any problems. One is for sure premium diesels are a lot cleaner. so no problems of diesel blockade. I have seen myself the fuel filters and diesel tank residue when cleaned (very minimal)
further I have used premium diesel in my old Amby and run for 50000 kms without problems.

dockap · 24th June 2008, 21:16

has anyone installed pete's box for magnum diesel
stock is 121 bhp and 0-100 is 9.8 secs how much difference will pete's box make to the above figures?

24th June 2008, 21:18

Quote:

Originally Posted by dockap

has anyone installed pete's box for magnum diesel
stock is 121 bhp and 0-100 is 9.8 secs how much difference will pete's box make to the above figures?

Doc, PM sameel, he knows some one with a pete'd Magnum.

fastcoder · 25th June 2008, 12:03

Hey fellows,

I'm planning to mod my swift VDI with Pete's chip. (Probably get it done this week) I also wanted to change the stock intake and exhaust, I had mailed Pete's and they recommeded I fit their Cotton green wind dynamisation kit.

Gurus whats your view on that. Is that the best thing to do or should I go for something else. What is the difference between the dynamisation kit and a CAI?

Also please advice on a FFE, which brand would be good?

Thanks in advance. I shall post my experience after my ride chipped.

GTO · 25th June 2008, 13:05

Fastcoder, Best for you to search within the forums. Plenty of modded Swift D's with us.

mclaren1885 · 25th June 2008, 20:54

I had the pleasure of doing some extensive testing on an Elantra Crdi running 18-21 psi (stock is 16 psi) for over 2 months now. Results are quite marvellous when compared to other peted elantra's in Bangalore. The owner of the car (who is still unable to log in to his ID(s) and post) shall be soon putting up a detailed review I hear. So lets wait for it.

Akshay1234 · 25th June 2008, 21:04

Quote:

Originally Posted by mclaren1885

I had the pleasure of doing some extensive testing on an Elantra Crdi running 18-21 psi (stock is 16 psi) for over 2 months now. Results are quite marvellous when compared to other peted elantra's in Bangalore. The owner of the car (who is still unable to log in to his ID(s) and post) shall be soon putting up a detailed review I hear. So lets wait for it.

so how will using petes + bumping up the psi be?

18th January 2008, 18:27	#122
nitrous Senior - BHPian Join Date: May 2004 Location: UAE/Lon/Madras Posts: 6,965 Thanked: 329 Times View My Garage	Pete's is just a distributor of PSI motorsports powerboxes from europe. Peter should be so happy his name is all over the forum and country.Lol!
	() Thanks

18th January 2008, 20:44	#123
crazyforspeed Newbie Join Date: Nov 2007 Location: Bangalore Posts: 10 Thanked: 0 Times	Thanks for the update. Then can anyone suggest if there is any other option(that is other than pete) to improve the performance of the indica turbo.
	() Thanks

19th February 2008, 07:36	#125
NOS Power BHPian Join Date: Jun 2004 Location: Kolkata Posts: 404 Thanked: 79 Times View My Garage	Discussions here mostly center around the pete's tuning box for new age diesels. I would like to know for e.g. how would one be able to extract a good amount of power from say the Tata 1948 cc NA diesel that sits in the sumo/old sierra etc. Things like turbo, intercooler, CAI, FFE are fine but is there any possibility of altering any electronics to get more out of the engine. Also other than the OE turbo that comes in the turbo sumo is it possible to fit a bigger turbo to push power over 100 BHP?
	() Thanks

19th February 2008, 11:34	#126
rippergeo Posts: n/a	@crazyforspeed and NOS Power you could try and build yourself a propane kit. it will help with boost,turbo will spool up faster, horsepower and torque will increase and so will mileage. it has been discussed on the earlier pages of this thread. Last edited by rippergeo : 19th February 2008 at 11:36.
	() Thanks

19th February 2008, 13:44	#127
krish69 BHPian Join Date: Feb 2008 Location: Mumbai Posts: 67 Thanked: 23 Times	Hi All, planning to install a Pete's box in my laura...only thing i read was that you have to use regular diesel vs. turbojet etc. Why is that? In my mind that should work even better..Cheers
	() Thanks

23rd June 2008, 17:56	#128
lganimys Newbie Join Date: Apr 2007 Location: Mysore Posts: 19 Thanked: 2 Times	Fantastic Link for SuperChargers & TurboChargers in Bangalore Hi Guys: Below is a fantastic link from where you can get super chargers and turbo chargers for your engines. Probably all models. The company is located in Bangalore. They even sell VTT chargers. Preusse India Pvt Ltd., Turbo Chargers, Super chargers, Gears, Gear Drivfes and Gear Boxes, Nox MAster System, Sonic Carburator Best Ganesh Laxmanmurthy
	() Thanks

23rd June 2008, 20:53	#129
manipal BHPian Join Date: Feb 2008 Location: manipal Posts: 82 Thanked: 469 Times	I have been using IOC xtrapremium diesel since day one in my Indica turbo, my car has covered 30000 kms without any problems. One is for sure premium diesels are a lot cleaner. so no problems of diesel blockade. I have seen myself the fuel filters and diesel tank residue when cleaned (very minimal) further I have used premium diesel in my old Amby and run for 50000 kms without problems.
	() Thanks

24th June 2008, 21:16	#130
dockap BHPian Join Date: Jun 2007 Location: Mangalore Posts: 871 Thanked: 481 Times View My Garage	has anyone installed pete's box for magnum diesel stock is 121 bhp and 0-100 is 9.8 secs how much difference will pete's box make to the above figures?
	() Thanks

25th June 2008, 12:03	#132
fastcoder Newbie Join Date: Jun 2008 Location: Thrissur Posts: 3 Thanked: 0 Times	Hey fellows, I'm planning to mod my swift VDI with Pete's chip. (Probably get it done this week) I also wanted to change the stock intake and exhaust, I had mailed Pete's and they recommeded I fit their Cotton green wind dynamisation kit. Gurus whats your view on that. Is that the best thing to do or should I go for something else. What is the difference between the dynamisation kit and a CAI? Also please advice on a FFE, which brand would be good? Thanks in advance. I shall post my experience after my ride chipped.
	() Thanks

25th June 2008, 13:05	#133
GTO Team-BHP Support Join Date: Feb 2004 Location: Bombay Posts: 71,518 Thanked: 309,563 Times View My Garage	Fastcoder, Best for you to search within the forums. Plenty of modded Swift D's with us.
	() Thanks

25th June 2008, 20:54	#134
mclaren1885 BANNED Join Date: Jul 2005 Location: Bangalore (the city of modded cars) !! Posts: 4,820 Thanked: 46 Times View My Garage Infractions: 0/1 (10)	I had the pleasure of doing some extensive testing on an Elantra Crdi running 18-21 psi (stock is 16 psi) for over 2 months now. Results are quite marvellous when compared to other peted elantra's in Bangalore. The owner of the car (who is still unable to log in to his ID(s) and post) shall be soon putting up a detailed review I hear. So lets wait for it.
	() Thanks