Tools for a DIYer

Thad E Ginathom · 4th May 2017, 21:03

Among the things that I collect are things like whisks in the kitchen, pumps (for water drainage) in the garden and, of course, screwdrivers and screwdriver sets for the tool collection.

Frankly, I was really thinking about this being a rather nice collector's item, with its smart wooden box, than useful expenditure of so much money.

ifixit 128-bit Universal Bit Kit In a nice oak box.

Yesterday, though, I actually used one of those bits, of a type I don't have in any other set, and had actually never seen before

As I tell my wife: Within reason (of course mine may differ from hers) if a tool is invaluable just once, it has paid for itself.

General comment on the kit though: I like the bits, I like the box, but I don't think much of the handles. They are designed to look good. At least the larger one should be a useful ratcheting handle. But that's OK: I'll admire the looks of the "CNC Machined aluminium" handles and use something else!

eko · 7th May 2017, 15:38

A recent addition to my DIY tools collection. A stethoscope for mechanics. I am seeing it for the first time in my life and immediately bought it. Can pin point source of noise, especially in engine where there are plenty of rotating parts. Is made in Taiwan. Purchased from Jubail in Saudi Arabia.

blackasta · 7th May 2017, 18:10

Quote:

Originally Posted by eko

A recent addition to my DIY tools collection. A stethoscope for mechanics. I am seeing it for the first time in my life and immediately bought it . Can pin point source of noise,especially in engine where there are plenty of rotating parts. Is made in Taiwan.Purchased from Jubail in Saudi Arabia.

Would you elaborate a bit more on how this is used?
Sure looks like a stethoscope used by doctors !

eko · 7th May 2017, 18:16

You can see near the 2 ear pieces in picture, there is a small metal probe. This has an removable extension which is on the left side of the picture.

The ear piece goes in like normal, and the probe has to touch the part being inspected.

manishalive · 7th May 2017, 19:35

Quote:

Originally Posted by eko

A recent addition to my DIY tools collection. A stethoscope for mechanics. I am seeing it for the first time in my life and immediately bought it . Can pin point source of noise,especially in engine where there are plenty of rotating parts. Is made in Taiwan.Purchased from Jubail in Saudi Arabia.

Damn cool this is. Very few guys have knowledge about tools and pick up good ones. This is one if them. Here is one picture of my friends workshop in ground floor of his house.

I see every imaginable tool with him. He does mend cars as a hobby.

adrian · 7th May 2017, 20:13

Quote:

Originally Posted by eko

A recent addition to my DIY tools collection. A stethoscope for mechanics. I am seeing it for the first time in my life and immediately bought it . Can pin point source of noise,especially in engine where there are plenty of rotating parts. Is made in Taiwan.Purchased from Jubail in Saudi Arabia.

As said by eko, it is a very useful tool to pinpoint and identify various noises from an automotive engine. That said, there is a cheap alternative which would serve the purpose - a long screw driver !
Position the tip of the screw driver to the particular part of the engine you want to inspect and hold your ear against the handle.

Quote:

Originally Posted by manishalive

Damn cool this is. Very few guys have knowledge about tools and pick up good ones. This is one if them. Here is one picture of my friends workshop in ground floor of his house.

I see every imaginable tool with him. He does mend cars as a hobby.

Wow, he is really serious with the hobby of his. Kudos to him.
One thing that came to my notice is that with that low clearance in the roof, he has to be super careful with that car lift.

Thad E Ginathom · 8th May 2017, 01:02

As a child I saw, in Black&White war movies, ship's engineers using listening devices to check on the condition of bearings, etc. My father explained to me what they were doing and why.

a4anurag · 8th May 2017, 01:28

Added another tool to my collection.

Got an open barrel crimping tool yesterday. Thanks to BHPian Sudeepg, who helped me just in time. Can't thank you much for the trouble taken to courier it to me. Also he sent me some terminals and connectors too.

Item cost is IIRC 850

Attaching an image :

Jeroen · 8th May 2017, 02:27

Quote:

Originally Posted by eko

You can see near the 2 ear pieces in picture , there is a small metal probe. This has an removable extension which is on the left side of the picture. The ear piece goes in like normal , and the probe has to touch the part being inspected.

It's a good idea to practice a lot with this tool. Listen to a lot of parts on various engines, so you get some feel on how they are sounding. Sometimes it might be obvious what you are listening too, other times you might just not know whether it sounds ok or not. Just like doctors who learn to use their stethoscopes, the more you use it, the more useful it becomes.

Jeroen

audioholic · 8th May 2017, 08:41

Quote:

Originally Posted by manishalive

Damn cool this is. Very few guys have knowledge about tools and pick up good ones. This is one if them. Here is one picture of my friends workshop in ground floor of his house.

I see every imaginable tool with him. He does mend cars as a hobby.

Does he run his own garage or is this just for his own hobby? Looking at the collection, its far more sophisticated than an average neighborhood garage. Does he let people use the tools(for a rent though) and perform some DIY repairs?

bejoy · 8th May 2017, 09:40

Quote:

Originally Posted by a4anurag

Got an open barrel crimping tool yesterday.

Is this available online? Any link for the same? I have seen in local stores but were very expensive ones.

diyguy · 8th May 2017, 09:54

Quote:

Originally Posted by bejoy

Is this available online?

Am not sure if this is the same as what I purchased last year for crimping my ethernet cables at home. Got it from Amazon for under 200rs
Edit: oh well noticed mine is different

SunnyBoi · 8th May 2017, 10:05

Quote:

Originally Posted by bejoy

Is this available online? Any link for the same? I have seen in local stores but were very expensive ones.

Quote:

Originally Posted by diyguy

Am not sure if this is the same as what I purchased last year for crimping my ethernet cables at home. Got it from Amazon for under 200rs
Edit: oh well noticed mine is different

Stanley crimping pliers are available for Rs 250-300

http://www.amazon.in/Stanley-Crimpin.../dp/B00L3Z75P4

Even with terminals, its 550 on amazon

http://www.amazon.in/Stanley-Crimpin.../dp/B00ICIKH6E

antardaksh · 8th May 2017, 12:31

Quote:

Originally Posted by SunnyBoi

Stanley crimping pliers are available for Rs 250-300

Hi SunnyBoi,

I believe its similar/same as following used for un-insulated terminals

https://www.aliexpress.com/item/Free...b-87d60971e490

Regards.

ilangop · 8th May 2017, 13:27

Quote:

Originally Posted by diyguy

Am not sure if this is the same as what I purchased last year for crimping my ethernet cables at home. Got it from Amazon for under 200rs
Edit: oh well noticed mine is different

Hi,

LAN and telephone socket crimper is different from the one being discussed here.

-Ilango

4th May 2017, 21:03	#1501
Thad E Ginathom Distinguished - BHPian Join Date: Jun 2007 Location: Chennai Posts: 11,441 Thanked: 29,997 Times	Re: Tools for a DIYer Among the things that I collect are things like whisks in the kitchen, pumps (for water drainage) in the garden and, of course, screwdrivers and screwdriver sets for the tool collection. Frankly, I was really thinking about this being a rather nice collector's item, with its smart wooden box, than useful expenditure of so much money. ifixit 128-bit Universal Bit Kit In a nice oak box. Yesterday, though, I actually used one of those bits, of a type I don't have in any other set, and had actually never seen before As I tell my wife: Within reason (of course mine may differ from hers) if a tool is invaluable just once, it has paid for itself. General comment on the kit though: I like the bits, I like the box, but I don't think much of the handles. They are designed to look good. At least the larger one should be a useful ratcheting handle. But that's OK: I'll admire the looks of the "CNC Machined aluminium" handles and use something else!
	(1) Thanks

7th May 2017, 15:38	#1502
eko BHPian Join Date: Aug 2009 Location: TSR/Buccharest Posts: 56 Thanked: 88 Times View My Garage	Re: Tools for a DIYer A recent addition to my DIY tools collection. A stethoscope for mechanics. I am seeing it for the first time in my life and immediately bought it. Can pin point source of noise, especially in engine where there are plenty of rotating parts. Is made in Taiwan. Purchased from Jubail in Saudi Arabia. Attached Thumbnails Last edited by Rehaan : 9th May 2017 at 10:41. Reason: Please use spaces after punctuation marks (not before). Thanks.
	(3) Thanks

7th May 2017, 18:16	#1504
eko BHPian Join Date: Aug 2009 Location: TSR/Buccharest Posts: 56 Thanked: 88 Times View My Garage	Re: Tools for a DIYer You can see near the 2 ear pieces in picture, there is a small metal probe. This has an removable extension which is on the left side of the picture. The ear piece goes in like normal, and the probe has to touch the part being inspected. Last edited by Rehaan : 9th May 2017 at 10:40. Reason: Please use spaces after punctuation marks (not before). Thanks.
	() Thanks

8th May 2017, 01:02	#1507
Thad E Ginathom Distinguished - BHPian Join Date: Jun 2007 Location: Chennai Posts: 11,441 Thanked: 29,997 Times	Re: Tools for a DIYer As a child I saw, in Black&White war movies, ship's engineers using listening devices to check on the condition of bearings, etc. My father explained to me what they were doing and why.
	() Thanks

8th May 2017, 01:28	#1508
a4anurag BANNED Join Date: Oct 2011 Location: Hyderabad Posts: 12,346 Thanked: 21,451 Times	Re: Tools for a DIYer Added another tool to my collection. Got an open barrel crimping tool yesterday. Thanks to *BHPian Sudeepg*, who helped me just in time. Can't thank you much for the trouble taken to courier it to me. Also he sent me some terminals and connectors too. Item cost is IIRC 850 Attaching an image :
	() Thanks

Thread Tools	Search this Thread
	Search this Thread: Advanced Search