The Royal Enfield Mechanics Thread: All mechanics requirements and queries here

VTEC_Rocks · 19th February 2010, 10:43

Quote:

Since then, I have given it to another mech near Lalbagh road. Wasn't satisfied. Then, the last time gave it to the RE service center near Jayadeva Hospital. Am actually quite happy with their service and they did a good job.

That's good to know. The only problem with RE is if there are a lot of vehicles to service, he doesn't give attention to the vehicle and the issues are not addressed.
If not its a good place. Make it a point to speak to "Kalyan" in RE. He runs the showroom.
He's a cool guy and he would definitely help if you run into any problems.

Unknownsatan · 12th March 2010, 18:53

There is a very good mech near Domlur or indiranagar. An old mallu chap. Only problem is ya have to be with him till he finishes his work as he is too busy with his work. From what i have heard from my friend,he is really good with his work and doesnt charge much. Will try and get his no if anyone is interested.

Ketan · 13th March 2010, 01:05

^ I'm interested, let me know if you get more details.

whitesquall · 15th March 2010, 17:10

Quote:

Originally Posted by soumobakshi

Any idea on a Good and Honest mechanic near Vijayanagar?

There is a mechanic shop just behind my house in 1st block Rajajinagar. I don't know if they are good or honest since I dont own a bull but, I see lots of bulls at their workshop every day. . .may be he is gud?? This mechanic shop is on the subrahmanyanagar main road. Just take the immediate right turn after the Rajajinagar 1st block petrol pump (auto gas pump and not the kerosene pump) and on the 1st left turn at the corner itself u have this garage (in the cellar).

mituadas · 16th March 2010, 20:45

Dear All

For all Hyderbad Bullet lovers i have stated this thread.

As per my knowledge i know 3/4 mechanics are best here. So i am writing down the name if anybody know any good mechanic or Bad mechanic please post information.

Good mechanics in Hyderabad whom i know but if anybody is having any bad experience pls post it here.

1. Sudhakar (Ranigung,Bansilalpet)
2. Babar (Kachiguda)
3. Sriramlu (Tankbund)
4. Chaos (Toor bazar KOTI)

Thanks
S. Das

Rollin' Thunda · 16th March 2010, 21:25

@mituadas Thanks for starting this thread!

I would myself be interested to know if any good Bullet mechanics operate along the Mumbai road (Bhel x-road right down to Tolichowki, say).

bblost · 17th March 2010, 09:50

Quote:

Originally Posted by mituadas

1. Sudhakar (Ranigung,Bansilalpet)

http://www.team-bhp.com/forum/motorb...-pictures.html

Rollin' Thunda · 17th March 2010, 19:47

Quote:

Originally Posted by Rollin' Thunda

I would myself be interested to know if any good Bullet mechanics operate along the Mumbai road (Bhel x-road right down to Tolichowki, say).

@bblost Raniganj is quite far. Are there any good mechanics [may be not masters, but at least competent ones] in the area I indicated?

JayPrashanth · 17th March 2010, 20:06

Quote:

Originally Posted by whitesquall

There is a mechanic shop just behind my house in 1st block Rajajinagar. I don't know if they are good or honest since I dont own a bull but, I see lots of bulls at their workshop every day. . .may be he is gud?? This mechanic shop is on the subrahmanyanagar main road. Just take the immediate right turn after the Rajajinagar 1st block petrol pump (auto gas pump and not the kerosene pump) and on the 1st left turn at the corner itself u have this garage (in the cellar).

You must be talking about Sandeep. Honest chap. Recommended for regular service but not performance mods. A couple of my friends go to him and are happy.

Cheers,

Jay

JayPrashanth · 17th March 2010, 20:10

[quote=naveenroy;1739528]Nice wrench set - where and how much?

quote]

Wrench set is from Taparia. Jairam Das and Co is the palce I bought it. I paid about INR 2800/2900 Near the Bangalore City Market. Ekambaram and Sons(Bath fittings store) is the landmark which will be known by most people in and around the city market area.

Cheers,

Jay

Leepower · 17th March 2010, 20:35

Who is the best Bullet mech in Pune? I need to do some major works on my Bull

JayPrashanth · 17th March 2010, 21:49

Quote:

Originally Posted by Leepower

Who is the best Bullet mech in Pune? I need to do some major works on my Bull

IMHO, the best tuner in town is Chinmay Dangre of Corepower, Nigdi. If you want his number, I can PM you.

Cheers,

Jay

mituadas · 17th March 2010, 22:06

Please try to post BAD mechanics in the city. So that nobody from here should go there and spent money and time.Hope this will help us a lot.

Leepower · 18th March 2010, 00:46

What about Kunal Bike Works in Viman Nagar Pune or St Jude's in Wanowrie? How are these workshops?

JayPrashanth · 18th March 2010, 15:44

Quote:

Originally Posted by Leepower

What about Kunal Bike Works in Viman Nagar Pune or St Jude's in Wanowrie? How are these workshops?

While I haven't tried his workshop personally, I have heard from my experienced bulleteer friends that Kunal is good.

Cheers,

Jay

12th March 2010, 18:53	#122
Unknownsatan Senior - BHPian Join Date: Dec 2008 Location: Bangalore Posts: 2,338 Thanked: 1,537 Times View My Garage	There is a very good mech near Domlur or indiranagar. An old mallu chap. Only problem is ya have to be with him till he finishes his work as he is too busy with his work. From what i have heard from my friend,he is really good with his work and doesnt charge much. Will try and get his no if anyone is interested.
	() Thanks

13th March 2010, 01:05	#123
Ketan Senior - BHPian Join Date: Sep 2005 Location: Bangalore Posts: 1,005 Thanked: 449 Times View My Garage	^ I'm interested, let me know if you get more details.
	() Thanks

16th March 2010, 20:45	#125
mituadas BANNED Join Date: Aug 2006 Location: Hyderabad Posts: 81 Thanked: 22 Times	Royal Enfield Good Mechs In Hyderabad Dear All For all Hyderbad Bullet lovers i have stated this thread. As per my knowledge i know 3/4 mechanics are best here. So i am writing down the name if anybody know any good mechanic or Bad mechanic please post information. Good mechanics in Hyderabad whom i know but if anybody is having any bad experience pls post it here. 1. Sudhakar (Ranigung,Bansilalpet) 2. Babar (Kachiguda) 3. Sriramlu (Tankbund) 4. Chaos (Toor bazar KOTI) Thanks S. Das
	() Thanks

16th March 2010, 21:25	#126
Rollin' Thunda BHPian Join Date: Nov 2009 Location: now Hyderabad Posts: 288 Thanked: 94 Times	@mituadas Thanks for starting this thread! I would myself be interested to know if any good Bullet mechanics operate along the Mumbai road (Bhel x-road right down to Tolichowki, say).
	() Thanks

17th March 2010, 20:10	#130
JayPrashanth Senior - BHPian Join Date: Oct 2008 Location: Bangalore/Goa Posts: 1,322 Thanked: 2,158 Times	[quote=naveenroy;1739528]Nice wrench set - where and how much? quote] Wrench set is from Taparia. Jairam Das and Co is the palce I bought it. I paid about INR 2800/2900 Near the Bangalore City Market. Ekambaram and Sons(Bath fittings store) is the landmark which will be known by most people in and around the city market area. Cheers, Jay
	() Thanks

17th March 2010, 20:35	#131
Leepower BHPian Join Date: Feb 2010 Location: Maharashtra Posts: 366 Thanked: 78 Times	Who is the best Bullet mech in Pune? I need to do some major works on my Bull Last edited by Jaggu : 17th March 2010 at 21:06. Reason: Back to back posts, EDIT the original post once approved instead. Thanks
	() Thanks

17th March 2010, 22:06	#133
mituadas BANNED Join Date: Aug 2006 Location: Hyderabad Posts: 81 Thanked: 22 Times	Please try to post BAD mechanics in the city. So that nobody from here should go there and spent money and time.Hope this will help us a lot.
	() Thanks

18th March 2010, 00:46	#134
Leepower BHPian Join Date: Feb 2010 Location: Maharashtra Posts: 366 Thanked: 78 Times	What about Kunal Bike Works in Viman Nagar Pune or St Jude's in Wanowrie? How are these workshops?
	() Thanks