The Royal Enfield Mechanics Thread: All mechanics requirements and queries here

Leepower · 6th August 2010, 12:03

Thanks guys, problem solved. Took my baby to the RE service centre near Edapally toll. They did her up for free!!!

rajeev k · 6th August 2010, 14:59

That is very fine gesture from Enfield India.

Leepower · 6th August 2010, 20:09

It was the guys at RE service centre near Edapally toll who were super cool

foby.sebastian · 6th August 2010, 23:12

Quote:

Originally Posted by Leepower

It was the guys at RE service centre near Edapally toll who were super cool

I am glad to hear that your bike is alright now , the edapally service people are really good!

deepclutch · 8th September 2010, 08:51

Guys, Any Recommendations on Garages anywhere Ernakulam district/Thodupuzha Who can do Complete Rebuild of Bullets?

Thanks.

navin_v8 · 8th September 2010, 13:05

Quote:

Originally Posted by Edsel Rulez!

How did you find the job quality there? Incidentally, if you're in the Khar area, Antony has a Bullet garage near SNDT college in Santacruz. He's your guy for major repair work, and he does Bullet mods as well. His workshop is in a narrow gully right of the traffic signal when you're going from Santacruz police station (aeroplane garden) towards Juhu Koliwada.

If you go further north on SV Road (about 200 metres after the Mithibai College junction), there's a workshop run by a chap called Sunil. He is not purely a Bullet specialist, but he does a decent job. Then there's Prem, who has a specialised Bullet workshop on Juhu-Versova link road. You can take your pick depending on your location — let me know if you need any help with any of these guys.

Hi Edsel,

I stay in the close vicinity of Juhu Versova Link Road can you give me contact no of Prem. Also how well does he do the job on standard bullets and is how are his charges, is he reliable?

plz share the information

Regards,
Navin.

jeeva · 8th September 2010, 13:58

Quote:

Originally Posted by Gooney

I recently shifted to Gurgaon and need a decent royal enfield mechanic / garage. I remeber I found a thread on that somewher but cannot locate it.

Any help will be much appreciated.

I had a short stint in Gurgaon and I had bought a Bullet there then.
John's garage is the one which is very popular among the Bullet fraternity in Delhi. He is a very honest and a reasonable guy. I can vouch for this, inspite of my bad hindi and the new place as it was then.
John's garage is at Mahipalpur. When you are going to Delhi from Gurgoan, once you reach the Mahipalpur fly over, take the left service road. Go under the flyover and take a U turn. On the left side you will pass Radissons hotel. Keep a good watch to your left. The garage is behind a small compound wall and can be easily missed. Pappu's number was 9811375839, not sure if it has changed now.

djdryeyes · 17th October 2010, 15:34

Guys,

I need your help out here....The A.S.C in Annanagar Chennai has been my mechanic for my TBIRD Twinspark for the past 1 year. However, I find that he does not do full justice to the machine. Could you please suggest some good mechanics in Chennai who would take care of my baby....

Rgds,
DJ

sparkglow · 17th October 2010, 18:32

I recommend Mr. Jaffer - proprietor of JAF Auto Garage on the Harris Road, Pudupet Chennai close to the Egmore Magistrates Court. He takes care of 1976 model standard bullet and am a pretty satisfied customer.

naveenroy · 29th October 2010, 01:57

Hello all,

Anyone know a good Enfield mech around Koramangala 8th block. Would appreciate help!

torqueyTND · 2nd November 2010, 20:55

so guys , while i was thinking to ponder and get some details out for mech's in Central suburb mumbai ... I came across this guy whom i met named Shakeel. His works is almost good if not any better .I have a RE '97 and boy it had loads of rattling noise pushrod -- cam - timing wheel ,etc etc ... also my bike had no current so it waspretty much DEAD !
It toook him 12 mins to FIRE it and after a good 30 mins he made my old CI 350 absolutely Quite and Calm ...Half a kick and all you hear is the Shortbottle bursting out the merriful thump...Splendid ...I paid him 100/- for his labour

He is recommended for all Jugaad's and service schemes

Negatives: He is not Dependable ( but that was 3 yrs ago as told )

Address : Eastern Express Highway , Kamraj nagar , GHatkopar (East)
Ask him for VIcky or tell him Bike4095 he should relate the obvious

Ciao
TND

iron · 2nd November 2010, 22:12

Quote:

Originally Posted by torqueyTND

so guys , while i was thinking to ponder and get some details out for mech's in Central suburb mumbai ... I came across ................

Address : Eastern Express Highway , Kamraj nagar , GHatkopar (East)
Ask him for VIcky or tell him Bike4095 he should relate the obvious

Ciao
TND

Contact number Please!!

torqueyTND · 5th November 2010, 07:03

Quote:

Originally Posted by iron

Contact number Please!!

YOu have Got Mail ...

Please let me know how it all went in the end with regards to your needs
on the Bike.

coolToddy · 29th November 2010, 13:56

Bullet mechanics in Bangalore with expertise in electrical

Hello Team,
I have an Electra 5s and I am trying to replace the existing indicators with LED stuff. The new indicators were designed and constructed by my friend. I need a bullet mechanic with expertise in electrical work to help me fix the indicators. Its more than just removing the indicator casing and fixing the LED assembly. My new set comes with its specific circuit.

Please let me know about a mechanic who can help me with this. I will post the pictures of the complete set after I am done setting up the indicators.

Thanks and this happens to be my first post.

Have a great day,
./C

NOTE: I have searched the forums for this information and finally arrived at the Royal Enfield Mechanics thread. I hope this should be okay.

coolToddy · 6th December 2010, 17:32

Quote:

Originally Posted by coolToddy

Bullet mechanics in Bangalore with expertise in electrical

Hello Team,
I have an Electra 5s and I am trying to replace the existing indicators with LED stuff. The new indicators were designed and constructed by my friend. I need a bullet mechanic with expertise in electrical work to help me fix the indicators. Its more than just removing the indicator casing and fixing the LED assembly. My new set comes with its specific circuit.

Please let me know about a mechanic who can help me with this. I will post the pictures of the complete set after I am done setting up the indicators.

Thanks and this happens to be my first post.

Have a great day,
./C

NOTE: I have searched the forums for this information and finally arrived at the Royal Enfield Mechanics thread. I hope this should be okay.

HELP, Really need a mechanic to fix my LED assembly.

6th August 2010, 12:03	#166
Leepower BHPian Join Date: Feb 2010 Location: Maharashtra Posts: 366 Thanked: 78 Times	Thanks guys, problem solved. Took my baby to the RE service centre near Edapally toll. They did her up for free!!! Last edited by Leepower : 6th August 2010 at 12:05.
	() Thanks

6th August 2010, 14:59	#167
rajeev k Senior - BHPian Join Date: Jul 2009 Location: Emerging Metro Posts: 3,351 Thanked: 1,955 Times	That is very fine gesture from Enfield India.
	() Thanks

6th August 2010, 20:09	#168
Leepower BHPian Join Date: Feb 2010 Location: Maharashtra Posts: 366 Thanked: 78 Times	It was the guys at RE service centre near Edapally toll who were super cool
	() Thanks

8th September 2010, 08:51	#170
deepclutch Senior - BHPian Join Date: Oct 2008 Location: Muvattupuzha Posts: 1,167 Thanked: 164 Times	Guys, Any Recommendations on Garages anywhere Ernakulam district/Thodupuzha Who can do Complete Rebuild of Bullets? Thanks.
	() Thanks

17th October 2010, 15:34	#173
djdryeyes Newbie Join Date: Sep 2008 Location: Chennai Posts: 12 Thanked: 0 Times	Looking for a TBIRD Mechanic in Chennai Guys, I need your help out here....The A.S.C in Annanagar Chennai has been my mechanic for my TBIRD Twinspark for the past 1 year. However, I find that he does not do full justice to the machine. Could you please suggest some good mechanics in Chennai who would take care of my baby.... Rgds, DJ
	() Thanks

17th October 2010, 18:32	#174
sparkglow BHPian Join Date: Jun 2006 Location: Chennai Posts: 51 Thanked: Once	I recommend Mr. Jaffer - proprietor of JAF Auto Garage on the Harris Road, Pudupet Chennai close to the Egmore Magistrates Court. He takes care of 1976 model standard bullet and am a pretty satisfied customer.
	() Thanks

29th October 2010, 01:57	#175
naveenroy Senior - BHPian Join Date: May 2009 Location: Atlanta, GA Posts: 1,518 Thanked: 1,318 Times	Hello all, Anyone know a good Enfield mech around Koramangala 8th block. Would appreciate help!
	() Thanks

2nd November 2010, 20:55	#176
torqueyTND BHPian Join Date: Oct 2009 Location: mumbai Posts: 102 Thanked: 3 Times	so guys , while i was thinking to ponder and get some details out for mech's in Central suburb mumbai ... I came across this guy whom i met named Shakeel. His works is almost good if not any better .I have a RE '97 and boy it had loads of rattling noise pushrod -- cam - timing wheel ,etc etc ... also my bike had no current so it waspretty much DEAD ! It toook him 12 mins to FIRE it and after a good 30 mins he made my old CI 350 absolutely Quite and Calm ...Half a kick and all you hear is the Shortbottle bursting out the merriful thump...Splendid ...I paid him 100/- for his labour He is recommended for all Jugaad's and service schemes Negatives: He is not Dependable ( but that was 3 yrs ago as told ) Address : Eastern Express Highway , Kamraj nagar , GHatkopar (East) Ask him for VIcky or tell him Bike4095 he should relate the obvious Ciao TND
	() Thanks

29th November 2010, 13:56	#179
coolToddy Newbie Join Date: Nov 2010 Location: Bangalore Posts: 11 Thanked: Once	Bullet mechanics in Bangalore with expertise in electrical Hello Team, I have an Electra 5s and I am trying to replace the existing indicators with LED stuff. The new indicators were designed and constructed by my friend. I need a bullet mechanic with expertise in electrical work to help me fix the indicators. Its more than just removing the indicator casing and fixing the LED assembly. My new set comes with its specific circuit. Please let me know about a mechanic who can help me with this. I will post the pictures of the complete set after I am done setting up the indicators. Thanks and this happens to be my first post. Have a great day, ./C NOTE: I have searched the forums for this information and finally arrived at the Royal Enfield Mechanics thread. I hope this should be okay.
	() Thanks