[k2max6]

Hi.I want to fit a boot release in my wagonR too. I have these pictures.Can these of any help. I can replace whatever parts needed.Please guide me which parts to bring and is it really feasible as in case of alto.

[AltoHoncho]

The New Alto limited edition Xcite has got the remote boot opener as a standard fitment. I think the whol assembly can be picked As-Is from it and fitted in any variant by some tweaks.

[Technocrat]

What do you mean by whole assembly?

We(who have recently got it done) have same setup as the new Xcite would have.

[ddd08]

is there anyplace in Mumbai where I can get the parts and installation done. Dont wanna do it myself.

[sabret00the]

I'm not sure how many guys here are aware of it or how many guys have already posted here in orkut ALTO community but it's still worth mentioning in this thread: orkut -

[hvishwanathan]

hey bro,

planning to replace the front 2 way setup with a 3 way setup. pm me for the costs.

thanks

[S.I.N.G.H]

Originally Posted by hvishwanathan

thanks bro,

I already have the romote boot lid opener fitted 4 months back a[/i] ??

sir how much did the lever assemble cost from MASS? when i inquired i was told that it is for 700 bucks.

[hvishwanathan]

Originally Posted by S.I.N.G.H

sir how much did the lever assemble cost from MASS? when i inquired i was told that it is for 700 bucks.

Well I dont remember the right amount but it was less than 400 bucks I paid

[samsag12]

Even i would like to know the procedure, time taken and cost involved for getting and fitting the remote boot lock installed in my car. Do i get it done at MASS.

[hvishwanathan]

Originally Posted by samsag12

Even i would like to know the procedure, time taken and cost involved for getting and fitting the remote boot lock installed in my car. Do i get it done at MASS.

@samsag, there is a different thread altogether for this. I would not know when you can get it done at Lucknow. I got the parts from Opera house here in Mumbai and the fitment was a DIY

[S.I.N.G.H]

Originally Posted by hvishwanathan

Well I dont remember the right amount but it was less than 400 bucks I paid

sir could you please provide us with the part number so that it is easier for us to source it.

[Technocrat]

Hi Please refer to following post for part number details

Originally Posted by cyclops

I have already bought the parts and they are with me. Initially he did not agreed to it, and was referring me to go to their retail outlet somewhere in Rasta Peth, but I insisted and got em..

Even I was thinking on similar lines, there's this Shetty's Maruti Service very close to my place, maybe I'll approach them to install..



The cost break-up with the exact part nos. is as follows,

83310M76G50 ---> Lever ---> Rs. 41.95/-
83350M79G20 ---> Cable ---> Rs. 92.68/-
82650M79G00 ---> Striker ---> Rs. 31.05/-
Gross Total ---> Rs. 165.68/-
Add Taxes ---> Rs. 20.71/-
Net Total ---> Rs. 186.00/-

This would be useful for all of us for procuring the right parts.

I have noticed one thing, the MRP mentioned on these parts covers is a bit higher than the actual invoiced cost. Even if we go by MRP the cost comes around Rs. 230/-

[deep_bang]

hi all - i am planning to check with ESSAR auto about the parts in BANGALORE.

Just wanted to know if this will work on Alto Standard. Mine does not have the remote fuel lid opener also.

[deep_bang]

--------------------------------------------------
The cost break-up with the exact part nos. is as follows,

83310M76G50 ---> Lever ---> Rs. 41.95/-
83350M79G20 ---> Cable ---> Rs. 92.68/-
82650M79G00 ---> Striker ---> Rs. 31.05/-
Gross Total ---> Rs. 165.68/-
Add Taxes ---> Rs. 20.71/-
Net Total ---> Rs. 186.00/-
--------------------------------------------------

@Cyclops: Thanks very much for the part numbers. Had gone to ESSAR Auto and got 2 parts. WIll get the last one in the next few days.

[wildsdi5530]

Any Bangy boys done it yet? Is it available near Yashwanthpur? Also is the rear parcel tray available? Can a power socket be fitted?