Remote Boot Opener in ALTO LXi - Edit: Info on Pg 3 & 8 and a Detailed DIY on pg 13

ASHISHPALLOD · 27th May 2009, 11:58

Just called Maruti showroom here at Baramati and found no spares available for remote boot opener.
It will be great if any Pune bhpian post the availability of parts required for remote boot opener.

Technocrat · 27th May 2009, 12:00

Cool let me know when you get the info

rjstyles69 · 27th May 2009, 12:32

Quote:

Originally Posted by Ramsagar

6.??? finally guess what?? teaser.

I know its a sin to take wild guesses, however here's my shot at it a FFE ?

sabret00the · 27th May 2009, 23:02

Quote:

Originally Posted by Technocrat

Sounds good, do you have any idea on cost involved as Sabretooth hasn't posted the costs involved

Guys guys forgive me. Had a very busy week. Will post the part number and cost details tomorrow from office.

sabret00the · 28th May 2009, 11:05

Part Number and Cost Details as follows:

Technocrat · 28th May 2009, 13:16

Thanks for posting the details dude

Btw it doesn't show the cost for the new Striker/lock latch.

sabret00the · 28th May 2009, 13:45

Quote:

Originally Posted by Technocrat

Thanks for posting the details dude

Btw it doesn't show the cost for the new Striker/lock latch.

Your welcome my friend.

Actually my bill doesnt show the details of the new latch. Will call the service center and find out asap.

SLK · 28th May 2009, 14:18

Quote:

Originally Posted by sabret00the

Your welcome my friend.

Actually my bill doesnt show the details of the new latch. Will call the service center and find out asap.

Did you pay for it? If not, don't remind them that. . . .

sabret00the · 28th May 2009, 17:00

Quote:

Originally Posted by SLK

Did you pay for it? If not, don't remind them that. . . .

It just occurred to me that they did'nt bill me for the Latch.

amit_mechengg · 28th May 2009, 19:30

Sadly the parts above are not available anywhere in pune. not even the MASS and not even the SAI service authorised dealer of spare parts. i also searched the entire spare parts market in nanapeth and deccan area.
however i have asked sai service and one spare part dealer to order the parts. lets see when they arrive. they said it will take around 10-15 days to source.

the parts cost as follow at sai service:
1. Striker : 35Rs
2. Cable : 72 Rs
3. lever : 42 Rs

amit_mechengg · 28th May 2009, 19:55

while browsing i found the alto part manual online.
the striker link is

Untitled Document

and the full part manual is

Index of /alto

the only problem is heading is in different language. you have to open each and every page and find the part you require.

sabret00the · 28th May 2009, 22:28

Quote:

Originally Posted by amit_mechengg

while browsing i found the alto part manual online.
the striker link is

Untitled Document

and the full part manual is

Index of /alto

the only problem is heading is in different language. you have to open each and every page and find the part you require.

So it seems that the last piece of the puzzle has fallen into place too:

82650M79G00 STRIKER BACK DOOR LATCH 1 DX

and the cost of this part is Rs. 35 only.

So, Total Cost comes to: Rs.(45+95+35) = Rs.175 + Labour.

SLK · 29th May 2009, 05:14

So that is cheap!!

How do they put the cable through? How does it find it way to the exact place it needs to be and does not end up at the fuel lid instead

?

amit_mechengg · 29th May 2009, 10:23

Quote:

Originally Posted by sabret00the

So it seems that the last piece of the puzzle has fallen into place too:

82650M79G00 STRIKER BACK DOOR LATCH 1 DX

and the cost of this part is Rs. 35 only.

So, Total Cost comes to: Rs.(45+95+35) = Rs.175 + Labour.

82650M79G00 82650M79G10 is the biggest confussion.

i have asked him to order both. he is not sure which belongs to the VXi. so i am ready to spend another 35rs. the parts are damn cheap but are very rare it seems in the market.
if i dont get the striker i will modify the existing one to accommodate the cable. may be by brazing a washer or some ring to it.the mechanism is very simple.

Quote:

Originally Posted by SLK

So that is cheap!!

How do they put the cable through? How does it find it way to the exact place it needs to be and does not end up at the fuel lid instead

?

laying the cable is not at all the issue. its very simple. you can even do it yourself. you just have to open the trim for the same.

cyclops · 29th May 2009, 10:50

Hi Amit, where in pune are you ordering the part from? Maybe all of us in pune can jointly order the parts so that the dealer would be interested in the bulk deal. Then we can also negotiate with him, if not for cost, for the time taken to get the order shipped..

We can prepare a list of people who would be interested in getting it. What say?

Quote:

Originally Posted by amit_mechengg

82650M79G00 82650M79G10 is the biggest confussion.

i have asked him to order both. he is not sure which belongs to the VXi. so i am ready to spend another 35rs. the parts are damn cheap but are very rare it seems in the market.
if i dont get the striker i will modify the existing one to accommodate the cable. may be by brazing a washer or some ring to it.the mechanism is very simple.

laying the cable is not at all the issue. its very simple. you can even do it yourself. you just have to open the trim for the same.

27th May 2009, 11:58	#61
ASHISHPALLOD Senior - BHPian Join Date: Oct 2006 Location: MH42 Posts: 2,006 Thanked: 334 Times	Just called Maruti showroom here at Baramati and found no spares available for remote boot opener. It will be great if any Pune bhpian post the availability of parts required for remote boot opener.
	() Thanks

27th May 2009, 12:00	#62
Technocrat Senior - BHPian Join Date: Feb 2004 Location: GTA Posts: 14,813 Thanked: 2,700 Times	Cool let me know when you get the info
	() Thanks

28th May 2009, 11:05	#65
sabret00the BHPian Join Date: Mar 2006 Location: YYC \| BLR \| CCU Posts: 692 Thanked: 55 Times View My Garage	Alto Boot Release: Part Number And Cost Details Part Number and Cost Details as follows: Attached Thumbnails Last edited by sabret00the : 28th May 2009 at 11:09.
	() Thanks

28th May 2009, 13:16	#66
Technocrat Senior - BHPian Join Date: Feb 2004 Location: GTA Posts: 14,813 Thanked: 2,700 Times	Thanks for posting the details dude Btw it doesn't show the cost for the new Striker/lock latch.
	() Thanks

28th May 2009, 19:30	#70
amit_mechengg Senior - BHPian Join Date: Dec 2007 Location: Pune Posts: 2,488 Thanked: 2,252 Times View My Garage	Sadly the parts above are not available anywhere in pune. not even the MASS and not even the SAI service authorised dealer of spare parts. i also searched the entire spare parts market in nanapeth and deccan area. however i have asked sai service and one spare part dealer to order the parts. lets see when they arrive. they said it will take around 10-15 days to source. the parts cost as follow at sai service: 1. Striker : 35Rs 2. Cable : 72 Rs 3. lever : 42 Rs
	() Thanks

28th May 2009, 19:55	#71
amit_mechengg Senior - BHPian Join Date: Dec 2007 Location: Pune Posts: 2,488 Thanked: 2,252 Times View My Garage	while browsing i found the alto part manual online. the striker link is Untitled Document and the full part manual is Index of /alto the only problem is heading is in different language. you have to open each and every page and find the part you require.
	() Thanks

29th May 2009, 05:14	#73
SLK Senior - BHPian Join Date: Feb 2004 Location: DL XX XX XXXX Posts: 1,634 Thanked: 1,011 Times	So that is cheap!! How do they put the cable through? How does it find it way to the exact place it needs to be and does not end up at the fuel lid instead ?
	() Thanks