[Aviator_guy]

Originally Posted by ninjatalli

Thank you all for your replies; helped made the decision to go for a new hob.

I wonder if there's any setup that takes in old stuff for salvaging. Only bee in the bonnet is the wastage created (considering the existing hob will go to a garbage dump).

Unfortunately there is no market for used hob. Someone I know had to change old hob (it was only 2-3 years old) because he was not happy with its performance and service technicians couldn't care less. Hob was otherwise in working condition but still he couldn't find any way to sale or dispose it off so I suggested donating it to Karunashraya in Kundanhalli, near Whitefield, which takes care of terminally ill patients and accepts donations in cash or kind. They, in turn, sell things received in donations to vendors to raise money.
If nothing else works, you can try donation route.

[NPV]

Any suggestions for a 20L Solo Microwave oven?
I was looking at LG (I think I saw 3 models and the only difference was the colour and design on the glass door!). The door in each of these models is operated by a spring loaded push button/switch and the controls are digital (membrane based).

Visited a Pai showroom nearby and found an IFB branded microwave of same capacity but is cheaper than the LG and has Rotary knobs and normal pull type door. I thought this may be better in terms of ageing with time, as it has fewer points of failure, but no idea about the reliability and service support of IFB microwave ovens. Any recommendations? Any other brands that I should consider?

*We currently have a decade old 28L LG convection Microwave oven and we’re downsizing to a 20L solo since we want to use lesser space on the kitchen counter and also since we don’t use the convection features for baking/grilling etc, hence Solo for reheating alone makes sense.

[meerkat]

Originally Posted by NPV

...

*We currently have a decade old 28L LG convection Microwave oven and we’re downsizing to a 20L solo since we want to use lesser space on the kitchen counter and also since we don’t use the convection features for baking/grilling etc, hence Solo for reheating alone makes sense.

The compulsion to downsize to 20L won't allow you make a good choice, I'm afraid.

The cheap solo MWOs available in the Indian market are typically shoddily manufactured, probably without exception. The control pannel (rotary or membrane) would be the least of your worries in my view, -- either would likely last the short lifespan (~5 years) of a solo MWO.

* The cavity would typically be made of spray-painted steel, and would rust away soon enough if not very carefully maintained. I've had personal experience in my family with an LG solo which was unbelievably poorly made, with the cavity badly rusted before the magnetron died.

* The current cheap IFB models don't inspire confidence in this regard either.

* There are Samsung solo models with ceramic coated cavities which would probably fare better in this respect (although their solo models also seem to be cheaply made otherwise). However, their sizes are typically 23L. But your hands are apparently tied due to the 20L size limitation (although IIRC, I've seen some smaller Samsung solo model recently, --- you can explore).


If I were you, I'd spend a few thousands more to get a better-made convection model, even if my usage would be limited to just microwave heating! But unfortunately they don't come in smaller sizes (I think I've seen an apparently well-made Panasonic 23L under 10k).

* No comments regarding the quality of the after sales service of various brands. Although I hear that LG service is good, I would never buy one of their MWOs because their models for the Indian market are so shoddily manufactured (even their more expensive models).
.

[Thad E Ginathom]

Originally Posted by itwasntme

Any feedback on the Atomberg BLDC mixer-grinder? Looking to buy a all-in-one, and would prefer something a little quieter than the usual ones.

Originally Posted by smrtdvl

One of their serv engg visited today (that's another story wrt fans) and he too said not to go with Atomberg mixers as they are getting many service calls for the same.

Any update on the reputation/reliability of Atomberg mixie-grinders? I liked the look of what I saw online, then a search brought me to this exchange.

[smrtdvl]

Originally Posted by Thad E Ginathom

Any update on the reputation/reliability of Atomberg mixie-grinders? I liked the look of what I saw online, then a search brought me to this exchange.

Had a service issue with their fan again & there was another service engg visit y'day & unable to solve the prob is coming back again tomorrow. Will check with him and update here if there has been any improvement wrt to Mixier grinders service calls.

[itwasntme]

Originally Posted by itwasntme

We've had a KAFF built-in electric oven and microwave since 2013. Elegant looks and good quality - has never needed servicing either.

Folks, looking to exchange/upgrade our trusty KAFF built-in convection oven . Has served us faithfully and continues to do so, but the Boss Lady wants a new one.

Any recommendations? Tending towards KAFF itself but open to any alternatives too. It is a standard size of 24" x 24" x 24".

[Thad E Ginathom]

Originally Posted by Thad E Ginathom

Atomberg mixie-grinders?

And if not Atomberg, what high-class mixie-grinder?

We have a Preethi, don't want another one. Nothing wrong with it except that I've known quieter large industrial machinery!

Preethi replaced Prestige, which was fine, except eventually jars needed spare parts and the spare parts didn't last.

[Naetik30]

Originally Posted by Thad E Ginathom

And if not Atomberg, what high-class mixie-grinder?

We have a Preethi, don't want another one. Nothing wrong with it except that I've known quieter large industrial machinery!

Preethi replaced Prestige, which was fine, except eventually jars needed spare parts and the spare parts didn't last.

For mixer grinders in India - I find Panasonic to be the best. Power wise and noise wise. Have multiple in my immediate family (all based on my recommendation). Go for their Panasonic MX-AC400 range.

[smrtdvl]

Originally Posted by Thad E Ginathom

And if not Atomberg, what high-class mixie-grinder?

Atomberg is a go from service technicians side as the number of calls have reduced drastically and the newly bought ones seldom get complaints. If noise is not much of an issue Sujata mixer grinders are wonderful units with their juicer attachment and am very much happy with their performance.

[Thad E Ginathom]

Originally Posted by Naetik30

I find Panasonic to be the best. ... Go for their Panasonic MX-AC400 range.

Thanks, will check that out.

Originally Posted by smrtdvl

Atomberg is a go from service technicians side as the number of calls have reduced drastically and the newly bought ones seldom get complaints.

Thank you for that, good to know.

If noise is not much of an issue ...

It's very much an issue. It's the reason for replacing our current machine which is, otherwise, fine.

[dailydriver]

Originally Posted by Thad E Ginathom

It's very much an issue. It's the reason for replacing our current machine which is, otherwise, fine.

If noise is an important parameter then Philips' Simply Silent and Super Silent or Havells' Silencio series of mixer grinders are your best bets.

[anandbangalore]

Re: Rust buildup and prevention

Hi, I spotted some rust build up on the outer body and on the door hinges of our dish washer. After ensuring there are no leakages on the outside pipes I suspect the rust build up is from regular usage. Q are
1. For the existing rust buildup - how do I contain it? Spray wd40 or similar?

2. How do I prevent it? For a machine which uses water for its primary function, I don't see why the parts allow for rust buildup any how. IFBs response has been to also use an anti rust spray.

[RavSam]

Hello People!

A month ago I bought a Carrier 1.5 ton Split AC and facing a situation which I am not sure if it's a problem or I am doing something wrong.

If I turn on the AC and set a timer for any hour, it shuts off at that time correctly and the swing flap closes.

If I do not put the timer on and run it for few (4-6) hours and try to shut it down, it does not turn off. I see the "off" icon but the air flow keeps coming and the swing flap is open. But it will turn off if I turn it on again immediately and then shut it.

If I try to shut off the AC before the time that I had set it for, it does not turn off. I see the "off" icon but the air flow keeps coming and the swing flap is open. But it will turn off if I turn it on again immediately and then shut it.

Any suggestions or solutions? Or is it a feature. Please Help.

[saket77]

Originally Posted by anandbangalore

Re: Rust buildup and prevention

Hi, I spotted some rust build up on the outer body and on the door hinges of our dish washer. After ensuring there are no leakages on the outside pipes I suspect the rust build up is from regular usage. Q are
1. For the existing rust buildup - how do I contain it? Spray wd40 or similar?

2. How do I prevent it? For a machine which uses water for its primary function, I don't see why the parts allow for rust buildup any how. IFBs response has been to also use an anti rust spray.

Went through the same for our IFB dishwasher as well after 12 years of continuous service. I just sanded the area around the hinge and applied a shade of paint (dark silver) to cover the patch. I guess that is what I could have done. Yes, anti-rust spray is an option but since the area looks prone to corrosion, it will eventually give up.

[rajeevsulu]

Originally Posted by Thad E Ginathom

Thanks, will check that out.


Thank you for that, good to know.

It's very much an issue. It's the reason for replacing our current machine which is, otherwise, fine.

You could check out Sujata make of mixers. The motors are better and they last quite a while.Most juice shops use these mixies as the motors are higher rated.

Cheers