[aypatel]

Originally Posted by shajufx

Sorry to hear that, looks like they sent you the wrong one ! Could you post some pics ? I dont have any mat images yet, will take it tomorrow without fail. But one thing I can assure, my mats are like measured and made for the floor, not even an mm of extra width or length !

I am attaching pictures for your reference. can you please post some of your pics ?

[shajufx]

Originally Posted by aypatel

I am attaching pictures for your reference. can you please post some of your pics ?

That looks similar to what I have, just give a push, it should fit in perfectly. The rear centre edges go under the side mats. Do you have any other mat under these ? Because they look like one on top of another. I will take some pictures tomorrow morning as I work on UK hours. Will post it for your reference.

[Rehaan]

Originally Posted by aypatel

I am attaching pictures for your reference. can you please post some of your pics ?

Maybe these are for the previous gen X1?

[aypatel]

Originally Posted by shajufx

That looks similar to what I have, just give a push, it should fit in perfectly. The rear centre edges go under the side mats. Do you have any other mat under these ? Because they look like one on top of another. I will take some pictures tomorrow morning as I work on UK hours. Will post it for your reference.

I do not have any mats under these. The rear center piece itself is to broad (width wise) so will not fit regardless of the length. The guy said to return it and he will check if they sent the right ones. In my opinion, it is too big. you can see from the photos as well. I am thinking it might be for the old X1.

[shajufx]

Originally Posted by aypatel

....In my opinion, it is too big. you can see from the photos as well. I am thinking it might be for the old X1.

I too think its of the older X1, unless some owners could confirm otherwise. Sorry for the delay from my side, my mats were not clean but why to delay just because of that Please have a look, its a perfect fit for my floor, assuming it's the right size and fit for the new X1. Notice, I removed their metal logo from the driver side mat, it was fixed with 2 screws anyway !

[abhi182]

Made the mistake of ordering directly from Coozo
Didn't get any email confirmation or updates other than a text message with the order ID

Got a call yesterday from some vague courier agency yesterday and a lady with a very heavy accent asked me to come to one of the peths in Pune (couldn't decipher which one) to pick up a courier with some mats from Delhi as they apparently do not do home deliveries

Asked her to return the package to sender and have sent the coozo folks a mail to process my refund

[meetzap]

Hello,

I am looking for 3D Kagu Maxspider or other equivalent quality mats for my Vento 2016 TSI (with dead pedal) in Pune.

I am doubtful about the ones available online, whether they'll have the exact cut for the dead pedal and so I am a little reluctant for making an online purchase.

Can anyone guide me to a shop where I can find these in Pune?

Thanks in advance.

[escaflowne]

Originally Posted by daretodream

Sharing my review of 3D Maxpider Kagu Mats and Coozo 3D Mats for my 2 cars (2012 Fiat Linea Emotion) and (2015 Grand i10 - now sold)

3D Maxpider Kagu Mats

Car: Fiat Linea
Buy Date: June-2012
Colour: Beige (Whey beige - because it hides the dirt and footmarks better than the black one)
Price paid back then: Around 5K-6K (don't remember)

It was worth every penny spent. It is still going very strong and will last another decade easily..

The driver side mat is 'little' eroded near the clutch area due to footwear heel abrasion.

Can be bought from http://www.thecarlaundry.com/product-category/3d-mats/

The mats are quite strudy and thick. They've velcro lining 100% of bottom area and that results in snug-fit.

I check with them (Indranagar Branch Bangalore) for 3D Mats for my 2017 Jazz V CVT.Price quoted is Rs 7000 and 50% amount has to be paid as advance since they need to get from Store in Koramangala.

[escaflowne]

Got the 3D mats for my Jazz CVT.Its a perfect fit.Velcro on the entire back side makes it to stick to the carpet well.I must say that these mats add to the aesthetic of the car.
Driver side, foot rest part is area of concern. Though padding is given, I think this area will get worn out first.But, that will not be a issue since we can stitch/stick a new padding again.

Two reasons, why i didn't go for the 3M Nomad Mats.
1.Price range is near to the 3D Mats.
2.When food particles spill over it does a good job by absorbing it.But what happens is that, until you clean the mats, you are sending out an invite to the rodents. It is this reason why i didn't go for Noodles Mat.

Some pics.

[varshi93]

Originally Posted by escaflowne

Got the 3D mats for my Jazz CVT.

Hi, could you please tell me the dealer/shop for 3D mats in Chennai. I am looking to purchase them for my 2014 Audi Q7. Thanks in advance!

[rpunwani]

My friend is looking out for 3D mats for his Hyundai Elantra; he is based in Mumbai. Could any of you guide me to a dealer?

Thanks in advance

[atlantis0965]

Originally Posted by varshi93

Hi, could you please tell me the dealer/shop for 3D mats in Chennai. I am looking to purchase them for my 2014 Audi Q7. Thanks in advance!

Hi
You can try kalyani car jewels ! They are in tnagar !
I got a set for my vento ; last week !

[Sahil]

Anyone tried these kind of mats? http://www.amazon.in/Saral-Home-Prem...8653203&sr=8-6

[evilshantanu]

So, 6+ years of my Shadowfax (VW Vento Highline) and going strong. This also means that all the accessories which I bought in 2011 are now conking off.

I was looking for good 3D mats, please note that I am not looking for only tray type mats but actually 3D mats. The conclusion, I cannot find any 3D mats for Vento which are in beige color

No, Star mats are too shiny and not worth the price IMHO. Also, they are not 3D, they are just tray type mats

Any help would be highly appreciated. I dont mind shelling 6-7K for genuine 3D mats for Vento

[evilshantanu]

Originally Posted by yogiii

Recently purchased a Celerio and went for 3D Kagu Maxpider
Cost 6500 Rs
Got number of the dealer from eBay sharing here Sanjay: 9811236642
All mats fit perfectly but the mat for the transmission tunnel is a misfit apparently due to change in design for bottle holder from what it was at launch of Celerio.

Thanks for the number buddy. I finally got the original Maxpider for my Shadowfax.

In Delhi if you know the right guy, you can almost get anything! Sanjay is sending a guy to my office to get the mats delivered!