[comfortablynumb]

Originally Posted by Leoshashi

You can order it from boodmo too. Reason, this comes in packs of 5. So the MGP store/MASS may deny it. With boodmo, you can purchase a single piece too.

Thank you so much! I will try boodmo first, and if they don't have it, will try with MGP stores/dealers.

Do 5PK and P4Z differ only in colour, or is there any other difference too? Boodmo has an image for P4Z (its description also says "part number discontinued by manufacturer", but not for 5PK, hence bothering you again.

Cheers,
Vikram

[spgv]

Originally Posted by Leoshashi

Part No: 17530-77E00
Name: PULLEY IDLER
Price: Rs. 1322

Part No: 17540-77E10
Name: TENSIONER ASSY
Price: Rs. 4295

Attaching pic of both parts, do let me know if it fulfills your query.

Regards,
Shashi

Thanks for the help. These are the parts i am looking for.
This is Great Job Shashi, keep going.

[Leoshashi]

Originally Posted by comfortablynumb

Thank you so much! I will try boodmo first, and if they don't have it, will try with MGP stores/dealers.

Do 5PK and P4Z differ only in colour, or is there any other difference too? Boodmo has an image for P4Z (its description also says "part number discontinued by manufacturer", but not for 5PK, hence bothering you again.

Cheers,
Vikram

5PK is black, P4Z is grey. Also both the links which I have given are open. M75J00 is discontinued, M75J01 is open. Also the pic on boodmo is just representative. I recommended boodmo because if the part is useless for you, they have a refund and return mechanism in place which is as efficient as Amazon.

[comfortablynumb]

Originally Posted by Leoshashi

5PK is black, P4Z is grey. Also both the links which I have given are open. M75J00 is discontinued, M75J01 is open.

Great, then I ordered the correct one, i.e 5PK

Will keep you posted on how it goes.

Thanks again!

[interc00led]

Hello Leoshashi,
Can you please give me the part numbers for 2nd gen swift/Dzire Workshop & supplementary manual along with the price ? Thanks.

[Leoshashi]

Originally Posted by interc00led

Hello Leoshashi,
Can you please give me the part numbers for 2nd gen swift/Dzire Workshop & supplementary manual along with the price ? Thanks.

Already posted by our farsighted BHPian a4anurag :

http://www.team-bhp.com/forum/long-t...ml#post3419028

http://www.team-bhp.com/forum/long-t...ml#post3965050

Regards,
Shashi

PS: I see the price has been updated compared to what BHPian a4anurag has given:

Part No: 99500M74L00-74E
Name: SWIFT SERVICE MANUAL
Price: Rs. 5595

Part No: 99510M74L00-74E
Name: SUPPLEMENTARY SERVICE MANUAL SWIFT
Price: Rs. 348

[Prathiiik]

Found these two parts in a relative's WagonR:

1) Front wheel Bearing:

Part number: 43440 M 68K00

Cost: ₹ 715.00


2) Front brake caliper - PIN

Part number: 55191 M 76G10

Cost: ₹100.00

[prithm]

Originally Posted by Leoshashi

This is one of the best lubes in aftermarket: https://www.flybhp.com/motul-motylge...RoCD_oQAvD_BwE

But if your car is under warranty, better to use what's being provided in the SVC. Insist for 75w90 only.

I better get it done in FNG with your suggestion.

Also, Shashi I was wondering if Axle boot maintenance is part of Maruti regular service protocol. Book does not talk anything about it and since I am nearing 40K now, should I go for boot cleaning and lubrication ?

The Axle grease for Maruti is OEM I suppose. Can you kindly help me with it so that I can walk into MGP store in Hyd and get it ordered if they don't stock !!

[Leoshashi]

Originally Posted by prithm

I better get it done in FNG with your suggestion.

Also, Shashi I was wondering if Axle boot maintenance is part of Maruti regular service protocol. Book does not talk anything about it and since I am nearing 40K now, should I go for boot cleaning and lubrication ?

The Axle grease for Maruti is OEM I suppose. Can you kindly help me with it so that I can walk into MGP store in Hyd and get it ordered if they don't stock !!

Axle boot requires no maintenance unless it's torn. Just keep an eye over it's physical condition and you are fine.

Regards
Shashi

[dass]

Not sure if you can provide this, as this is not part of the car list you have indicated.

This is for the 2nd Gen Dzire VDI. The cover for the cabin air filter is what I am looking at. One side of the locking panel broke when I tried to change it earlier and have been using it like that ever since, and hence would like to replace it. It's a plastic part, like a scale with locking mechanism on the two ends. Would you know the part number by any chance?

[Leoshashi]

Originally Posted by dass

Not sure if you can provide this, as this is not part of the car list you have indicated.

This is for the 2nd Gen Dzire VDI. The cover for the cabin air filter is what I am looking at. One side of the locking panel broke when I tried to change it earlier and have been using it like that ever since, and hence would like to replace it. It's a plastic part, like a scale with locking mechanism on the two ends. Would you know the part number by any chance?

I have already replied to this query of yours some time ago:


http://www.team-bhp.com/forum/techni...ml#post4224999

Direct replacement isn't available. So you will have to take a risk. Else, you can look for the part at scrapyards/from salvage cars.

[dass]

Originally Posted by Leoshashi

I have already replied to this query of yours some time ago:
.

Sorry.. Not sure how I missed it. would it be possible for you to provide the part number for the cabin filter for the same car? Dzire VDI 2013. Thanks again.

[Leoshashi]

Originally Posted by dass

Sorry.. Not sure how I missed it. would it be possible for you to provide the part number for the cabin filter for the same car? Dzire VDI 2013. Thanks again.

Part No: 95850M79M00
Name: CABIN AIR FILTER - CIAZ & NEW SWIFT
Price: Rs. 360

Regards,
Shashi

[chncar]

I have a question on the warranty for MGP components.

I have a Baleno that is in warranty and 1 year old. It is the Alpha model with the HID and DRLs. About 6 months ago my bumper got damaged and there was a minor crack on one of the headlamps so it was replaced at MASS.

Now, the DRL on that assembly is not working, and MASS refuses to replace it under warranty as it was replaced after the purchase of the car.

Should this not be covered under the overall warranty of the car, as it is an original part installed by MASS? Is there any warranty for the spare itself?

Are there any technical/service contacts at Maruti or Nexa that I can escalate to?

The DRL itself is not critical so I am not inclined to pay 17K of my own money to replace it, however I am really disappointed not only with the lack of reliability of the original part, and also Maruti's response.

[Leoshashi]

Originally Posted by chncar

I have a question on the warranty for MGP components.

I have a Baleno that is in warranty and 1 year old. It is the Alpha model with the HID and DRLs. About 6 months ago my bumper got damaged and there was a minor crack on one of the headlamps so it was replaced at MASS.

Now, the DRL on that assembly is not working, and MASS refuses to replace it under warranty as it was replaced after the purchase of the car.

Should this not be covered under the overall warranty of the car, as it is an original part installed by MASS? Is there any warranty for the spare itself?

Are there any technical/service contacts at Maruti or Nexa that I can escalate to?

The DRL itself is not critical so I am not inclined to pay 17K of my own money to replace it, however I am really disappointed not only with the lack of reliability of the original part, and also Maruti's response.

I think you are entitled for a Warranty replacement. Write a mail to Maruti and Nexa and describe your case in detail.

Regards,
Shashi