[Styler]

Hi Leoshashi,


With a lot of help from you, my Grand Vitara 2.0L 2007 was completely restored last year.I have completed one year now it is doing just fine.

Could you give me the Part Number and Prices of the following :


1. Front Shock Absoorbers
2. Clutch Plate
3. Clutch Pressure Plate
4. Clutch Cylinder (comes with bearing)


Thanks
Styler

[arnabchak]

Dear Leoshashi

My car cleaner unfortunately broke my car AC vent while cleaning.
he car is Wagon R(2012, K Series).
Its the round AC vent with a silver border, Left/passenger side.

Pls. share the part no. and the cost.

[Agnijit]

Hi,

Please see my requirement below and assist -

Model Name- Maruti Suzuki Alto
Variant- Lxi (BS 3) Year - 2008
Part Required - I need the entire panel with the 3 Rotary Knobs and the Small AC Switch (See Pic Below)

I had a liquid type fragrance in my car and my kid turned it upside down. The liquid dripped along the knob and switch borders, and now they are stuck. No action possible. I fear they will break if i apply more pressure.

[Leoshashi]

Originally Posted by prithm

Highlighted yellow in picture. Completely gone and home for ants, flies and mosquitoes.

Attachment 1763248

It's replacement isn't available in MGP AFAIK. You can look on amazon or paytm. If I am not wrong, the buttons have gone, right??

Originally Posted by scorpian

Hello Shashi,
Could you help me with sx4 vdi 2012.
Parts needed- 1)Steering rack bush. Is this available as MGP? i see some websites offering steering rack bush which i need for some noise in mine. A new assembly as per MASS costs a whopping 38k. Am willing to try a bush replacement if possible or any other idea that you may have.
2)Caliper pins both sides- mine have worn making noise.
3)AC vent-left side extreme,mine is silver and grey combination round in shape.
4)OVRM covers-is this part sold separately or entire assembly has top be purchased?

Thanks in advance.

1. Already explained by Audioholic, thanks!

2. Part No: 55840M55K00
Name: .PIN SET SLIDING
Price: Rs. 254

3.Part No: 73630M75J00-GCY
Name: LOUVER COMP SIDE VENT(GRAY/SILV
Price: Rs. 118

4. Not available separately.

Originally Posted by revvharder

Shashi sir any update on my query. Do you recommend buying tail light of the same make from some near by store or should i go with MGP.

Extremely sorry, not sure how I missed your query.

Part No: 71711M67LA0-5PK
Name: BUMPER FRONT
Price: Rs. 1223

Part No: 35650M67L00
Name: LAMP UNIT RR COMBINATION RH
Price: Rs. 917

Originally Posted by Styler

Hi Leoshashi,


With a lot of help from you, my Grand Vitara 2.0L 2007 was completely restored last year.I have completed one year now it is doing just fine.

Could you give me the Part Number and Prices of the following :


1. Front Shock Absoorbers
2. Clutch Plate
3. Clutch Pressure Plate
4. Clutch Cylinder (comes with bearing)


Thanks
Styler

1. Part No : 41601-64J01
Name: STRUT ASSLY FR SUSPENSION
Price: Rs. 9366

Part No: 41602-64J01
Name: STRUT ASSLY FR SUSPENSION
Price: Rs. 10106

2. Part No: 22100-65J00
Name: COVER ASSY CLUTCH
Price: Rs. 8550

3. Part No: 22400-65J20
Name: DISC CLUTCH
Price: Rs. 7111
Closed for SALE

4. Part No: 23810-64J20 or 23810-64J21
Name: CYLINDER ASSY CLUTCH MASTER
Price: Rs. 5069 or Rs. 5469

Both parts are compatible(same family root) and open

Originally Posted by arnabchak

Dear Leoshashi

My car cleaner unfortunately broke my car AC vent while cleaning.
he car is Wagon R(2012, K Series).
Its the round AC vent with a silver border, Left/passenger side.

Pls. share the part no. and the cost.

LXI or VXI?

Originally Posted by Agnijit

Hi,

Please see my requirement below and assist -

Model Name- Maruti Suzuki Alto
Variant- Lxi (BS 3) Year - 2008
Part Required - I need the entire panel with the 3 Rotary Knobs and the Small AC Switch (See Pic Below)

I had a liquid type fragrance in my car and my kid turned it upside down. The liquid dripped along the knob and switch borders, and now they are stuck. No action possible. I fear they will break if i apply more pressure.

Attachment 1765386

Kindly get it checked at MASS if its the front fascia which is damaged or the entire HVAC control assembly.

Regards,
Shashi

[prithm]

Originally Posted by Leoshashi

It's replacement isn't available in MGP AFAIK. You can look on amazon or paytm. If I am not wrong, the buttons have gone, right??

Not only the button Shashi, the entire underlying electronic set too. Everything just got broken to pieces. So, now I have only one duplicate key with keyfob intact.

So, if I ask the service station to get me a new key, will they get a vanilla key and configure it according to my central locking's PIN or do I need to get the entire OEM central locking changed ?

[arnabchak]

Dear Leoshashi
Model is LXi. CNG.

[dass]

Originally Posted by Leoshashi

Part No: 95850M79M00
Name: CABIN AIR FILTER - CIAZ & NEW SWIFT
Price: Rs. 360

Regards,
Shashi

This does not fit the Dzire 2013 model, this is 2 cms bigger than the one in the car. I have folded the edges and pushed it in, so far no impact on the air flow so I think it would be ok.

Originally Posted by Leoshashi

I have already replied to this query of yours some time ago:


http://www.team-bhp.com/forum/techni...ml#post4224999

Direct replacement isn't available. So you will have to take a risk. Else, you can look for the part at scrapyards/from salvage cars.

This one doesn't fit either, this is almost 2 inches bigger than what is required for the Dzire.

If anyone needs it, let me know and I will give it away.

[Jaggu]

Originally Posted by Leoshashi

This seems to be a real issue.

Part No: 17540-78K00
Root Part No: 17540-78K00
Name: TENSIONER ASSY GEN BELT
Price: Rs. 5087
Status: CLOSED FOR SALE

Part No: 17540-54L00
Root Part No: 17540-78K00
Name: TENSIONER ASSY GEN BELT
Price: Rs. 5087
Status: Open for Sale

Part No: 17540-54L00-RX0
Root Part No: 17540-78K00
Name: TENSIONER ASSY GEN BELT
Price: Rs. 1651
Status: CLOSED FOR SALE

Just to update here, i had written to MSIL with detailed pics of what i found online, what i could take from the front side of the engine and these part number. They responded in couple of days and assured they will help. Today the part has been received at the workshop and from the pics, it seems to be the right part. Hope things go smooth tomorrow at install

[drsingh]

Request details of wagon R vxi 2018 model left rear door with door handle.

[NPV]

Originally Posted by dass

This does not fit the Dzire 2013 model, this is 2 cms bigger than the one in the car. I have folded the edges and pushed it in, so far no impact on the air flow so I think it would be ok.

I have a first gen Dzire VXI (2009) and these are the part # for the Cabin Air Filter (Air Cleaner Element) used.
I change it every year or 10k Km.

From my last 2 service bills, I got the following information:

Element, Air Cleaner 13780M75J00 (2016)

Cabin Air Filter Swift 95861M74L00 (2017)

[--gKrish--]

Model : Zen LX Carburetor Euro1 2001
Part :
1. O ring-Distributor
2. Packing-Distributor

I had checked the part numbers at oriparts.com and boodmo.com but I suspect some miscrepancy. I hope they are same for MPFI and carb models. I have the mpfi model's part number and I see they are interchangeable with the Grand Vitara and Baleno sedan.

[Leoshashi]

Originally Posted by prithm

Not only the button Shashi, the entire underlying electronic set too. Everything just got broken to pieces. So, now I have only one duplicate key with keyfob intact.

So, if I ask the service station to get me a new key, will they get a vanilla key and configure it according to my central locking's PIN or do I need to get the entire OEM central locking changed ?

While ideally you'll probably need to change the whole kit, I've forwarded your query to my trusted SA who I think can help. I'll revert as soon as I receive his message.

Originally Posted by arnabchak

Dear Leoshashi
Model is LXi. CNG.

Part No: 73630M75J00-GCY
Name: LOUVER COMP SIDE VENT
Price: Rs. 118

Originally Posted by Jaggu

Just to update here, i had written to MSIL with detailed pics of what i found online, what i could take from the front side of the engine and these part number. They responded in couple of days and assured they will help. Today the part has been received at the workshop and from the pics, it seems to be the right part. Hope things go smooth tomorrow at install

Awesome support by MSIL. Still unbelievable how there can be two different parts under the same part number.

Originally Posted by drsingh

Request details of wagon R vxi 2018 model left rear door with door handle.

Part No: 68004M67L00
Name: PANEL ASSY REAR DOOR LH
Price: Rs. 7497

Part No: 82802M68K50-5PK
Name: HANDLE ASSY SIDE DOOR OUT LH
Price: Rs. 244

Originally Posted by --gKrish--

Model : Zen LX Carburetor Euro1 2001
Part :
1. O ring-Distributor
2. Packing-Distributor

I had checked the part numbers at oriparts.com and boodmo.com but I suspect some miscrepancy. I hope they are same for MPFI and carb models. I have the mpfi model's part number and I see they are interchangeable with the Grand Vitara and Baleno sedan.

Which O-Ring do you need?? Larger or smaller one??

Distributor packing for Carb Zen is probably discontinued. Will give you concrete info tomorrow.

Regards,
Shashi

[prithm]

Originally Posted by Leoshashi

While ideally you'll probably need to change the whole kit, I've forwarded your query to my trusted SA who I think can help. I'll revert as soon as I receive his message.

Thanks Shashi. I suppose this will be OEM for DZire 2014 Dec Model. Really will say it was pure luck that it died before electronically unlocking the car. Otherwise, we would have been in deep deep problem in middle of nowhere.

[--gKrish--]

Originally Posted by Leoshashi

Which O-Ring do you need?? Larger or smaller one??

Distributor packing for Carb Zen is probably discontinued. Will give you concrete info tomorrow.

Regards,
Shashi

There is a mild oil leak around the distributor and as per the FNG mechanic, both the O rings have to be replaced.

[vsathyap]

Can you please give me the part number and the price for a Maruti Alto K10 (new model; 2012 and later) Left Hand Side Rear Tail Lamp Assy?

The one I have is cracked and with the monsoons setting in, I don't want any water to seep inside the reflector housing. Will buy a new one if its practical/pocket friendly. Else, Will resort to some 3M tape.



Image Source/Credit: CarBlog India (https://www.carblogindia.com/maruti-...c-convenience/)