Car Audio Advice from the Audio Gurus: Use "Search thread" before posting a new Q!

clipto333 · 24th August 2007, 16:03

navinji,

can you tell me how to identify different type of capacitors? i asked my electronic stoe guy for ctr metallized polyester caps(4.7uf and 2.2uf for my infinity 6x9s) he said he didnt have ctr so he gave me some "BC CAPS". MPEA V 5 4.7mf k 250 is written on the cap. the cap has a yellow outside covering with shiny maroon inside.

is it a polyester cap? as i was planning to replace the bipolar electrolytics on my infinity 6x9s.

OT. would like to know if precision caps are available in india. for e.g. a 1% tolerance cap. i need some for my LC meter project. im stuck due to this. accuracy of the meter depends on what tolerance caps i use.

awaiting your reply
cheers
clip

Sam Kapasi · 24th August 2007, 16:26

Post a photo clip, it will make it easier to identify.

clipto333 · 24th August 2007, 17:03

Quote:

Originally Posted by Sam Kapasi

Post a photo clip, it will make it easier to identify.

ill post in sometime. thanks. can you identify a cap by looking at it? i have never been able to except for some like electrolytics, ceramic disc, tantalum.

baki you are the guru log so i rely on you guys to help me

cheers
clip

navin · 24th August 2007, 17:20

Quote:

Originally Posted by clipto333

he said he didnt have ctr so he gave me some "BC CAPS". MPEA V 5 4.7mf k 250 is written on the cap. the cap has a yellow outside covering with shiny maroon inside. is it a polyester cap?

OT. would like to know if precision caps are available in india. for e.g. a 1% tolerance cap.

are you sure he said BC caps not Vishay. those markings look like Vishay.

do they look like these
Capacitors - Vishay - Film, Pulse-AC/Precision (Film)
or these
Capacitors - Vishay - Polyester, Radial
or these
MKT 1813 - C-values 470 pF - 22 µF, Voltage 63 - 1000 VDC, Low Profile, AXIAL - Vishay Capacitors
or these
KP 374 - AC and Pulse Polypropylene Film Foil Capacitors KP Radial Epoxy Lacquered Type - Vishay Capacitors

Vishay makes 1% caps too but you have to import them.

Before I was married I used to travel 10-12 times a year so I used to buy my stuff from the US. After getting married and having a family I hardly travel so I ask my BIL in singapore to order stuff for me and keep them at his place. then if I go there i just carry all of it back in one go.

clipto333 · 24th August 2007, 18:02

Quote:

Originally Posted by navin

are you sure he said BC caps not Vishay. those markings look like Vishay.

do they look like these
Capacitors - Vishay - Film, Pulse-AC/Precision (Film)
or these
Capacitors - Vishay - Polyester, Radial
or these
MKT 1813 - C-values 470 pF - 22 µF, Voltage 63 - 1000 VDC, Low Profile, AXIAL - Vishay Capacitors
or these
KP 374 - AC and Pulse Polypropylene Film Foil Capacitors KP Radial Epoxy Lacquered Type - Vishay Capacitors

Vishay makes 1% caps too but you have to import them.

Before I was married I used to travel 10-12 times a year so I used to buy my stuff from the US. After getting married and having a family I hardly travel so I ask my BIL in singapore to order stuff for me and keep them at his place. then if I go there i just carry all of it back in one go.

here, im posting the pics.

when will these things be available off the shelf in India? :( can you believe heat shrink tubing isnt available in my city? its really sad.

cheers
clip

navin · 24th August 2007, 23:32

Those caps do look like CTRs but they dont look as well made. I have not heard of BC caps and initially thought you were refering to BC Components (which was merged into Vishay).

navin · 24th August 2007, 23:33

Clip, I can get the components arranged but how do I get these to Jalandar?

clipto333 · 25th August 2007, 11:24

Quote:

Originally Posted by navin

Clip, I can get the components arranged but how do I get these to Jalandar?

you can get the components in india or from another country? navinji, ill wait till i go to delhi. ill buy whatever i want from there. and if i dont get the things from delhi then toh ill need your help. i might visit bombay in the near future.

cheers
clip

navin · 25th August 2007, 11:43

sorry I meant CTR. I can even get he 1% caps the next time I go to Sing (at Xmas) but I have no way to get them to Japandar.

Sam Kapasi · 25th August 2007, 12:07

Japandar is a place between Tokyo and Punjab isn't it?

clipto333 · 25th August 2007, 13:39

Quote:

Originally Posted by navin

sorry I meant CTR. I can even get he 1% caps the next time I go to Sing (at Xmas) but I have no way to get them to Japandar.

thanks for the help navinji. ill see if i can manage to get the stuff picked up. ill let you know if possible. and please do get me 1% or lower caps. thanks again.

Quote:

Originally Posted by Sam Kapasi

Japandar is a place between Tokyo and Punjab isn't it?

there is a punjab in japan also. lol punjap and the city is japandhar.lol just kidding.

sam bhai, you are always on the lookout for typos right? lol

ill say it again. love your sense of humor. two thumbs up to you.

cheers
clip

navin · 27th August 2007, 00:37

Quote:

Originally Posted by clipto333

sam bhai, you are always on the lookout for typos right? lol

ill say it again.

Sam does not have to look beyond me. Most of my life I suffered from 2 maladies A.D.D and Dyslexia. The A.D.D improved after I got involved in Tennie (Volvo Tennis League) and Music (3 chord metaladies) but the Dyslexia is the same hence the typos keep surfacing.

iraghava · 27th August 2007, 00:59

Navin/Sam/Ajay - What do you guys think of current Nakamichi speakers? A prominent dealer in Delhi (Auto Marc aka Sanjay, LBM's dear friend!) is hard selling them.

I have no idea about how good or bad they are.

navin · 27th August 2007, 01:09

Quote:

Originally Posted by iraghava

Navin/Sam/Ajay - What do you guys think of current Nakamichi speakers?

Nakamichi has lot much of it's sheen. I did get to listen to a pair of components (in fact I compared them to the Infintiy 6010 that are in my wife's car) and I did not like them enough. They looked well made and the bass was nice but the tweeter left much to be desired. For that matter I had already modified the 6010 XO so I dont know if I could have made the Naks sound nicer by doing the same.

What does LBM think (I presume he has heard them)?

Bass&Trouble · 27th August 2007, 13:14

Quote:

Originally Posted by iraghava

Navin/Sam/Ajay - What do you guys think of current Nakamichi speakers? A prominent dealer in Delhi (Auto Marc aka Sanjay, LBM's dear friend!) is hard selling them.

I have no idea about how good or bad they are.

A lot of Nakamichi has come in through some grey route: subs, comps, amps etc. Not heard any of it. Will let you know when I do. For a grey product it isn't exactly very cheap.

24th August 2007, 16:03	#6886
clipto333 BHPian Join Date: Dec 2006 Location: jalandhar Posts: 912 Thanked: 7 Times View My Garage	navinji, can you tell me how to identify different type of capacitors? i asked my electronic stoe guy for ctr metallized polyester caps(4.7uf and 2.2uf for my infinity 6x9s) he said he didnt have ctr so he gave me some "BC CAPS". MPEA V 5 4.7mf k 250 is written on the cap. the cap has a yellow outside covering with shiny maroon inside. is it a polyester cap? as i was planning to replace the bipolar electrolytics on my infinity 6x9s. OT. would like to know if precision caps are available in india. for e.g. a 1% tolerance cap. i need some for my LC meter project. im stuck due to this. accuracy of the meter depends on what tolerance caps i use. awaiting your reply cheers clip
	() Thanks

24th August 2007, 16:26	#6887
Sam Kapasi Distinguished - BHPian Join Date: Jul 2005 Location: Mumbai (but wat Posts: 6,935 Thanked: 2,483 Times View My Garage	Post a photo clip, it will make it easier to identify.
	() Thanks

24th August 2007, 23:32	#6891
navin Team-BHP Support Join Date: Mar 2004 Location: Mumbai Posts: 25,421 Thanked: 9,998 Times	Those caps do look like CTRs but they dont look as well made. I have not heard of BC caps and initially thought you were refering to BC Components (which was merged into Vishay).
	() Thanks

24th August 2007, 23:33	#6892
navin Team-BHP Support Join Date: Mar 2004 Location: Mumbai Posts: 25,421 Thanked: 9,998 Times	Clip, I can get the components arranged but how do I get these to Jalandar?
	() Thanks

25th August 2007, 11:43	#6894
navin Team-BHP Support Join Date: Mar 2004 Location: Mumbai Posts: 25,421 Thanked: 9,998 Times	sorry I meant CTR. I can even get he 1% caps the next time I go to Sing (at Xmas) but I have no way to get them to Japandar.
	() Thanks

25th August 2007, 12:07	#6895
Sam Kapasi Distinguished - BHPian Join Date: Jul 2005 Location: Mumbai (but wat Posts: 6,935 Thanked: 2,483 Times View My Garage	Japandar is a place between Tokyo and Punjab isn't it?
	() Thanks

27th August 2007, 00:59	#6898
iraghava Senior - BHPian Join Date: Oct 2005 Location: Bhaiyyaland Posts: 7,993 Thanked: 281 Times View My Garage	Navin/Sam/Ajay - What do you guys think of current Nakamichi speakers? A prominent dealer in Delhi (Auto Marc aka Sanjay, LBM's dear friend!) is hard selling them. I have no idea about how good or bad they are.
	() Thanks