The Damping Material and Sound Deadener Thread

Vid6639 · 8th May 2007, 13:06

Quote:

Originally Posted by navin

No the reason for this was we were looking at those who would be in mumbai (we cheapskates want to save on shipping). Rags is in delhi and so that does not help.

he has his own airline so coming to mumbai to collect this is not a problem for him.

how do you damp the spoiler and license plate???

BUSA · 8th May 2007, 13:06

Just spoke to Wuerth India Private Limited, they told me for a full car it will cost me Rs. 2500 excluding installation charges. Is it worth it.

What is the full cost of damping using Dynamat??

Rtech · 8th May 2007, 13:12

Quote:

they told me for a full car it will cost me Rs. 2500

huh! What are we missing here? What do they define full car as? And how come it's so cheap?

low_bass_makker · 8th May 2007, 13:14

Quote:

Originally Posted by BUSA

Just spoke to Wuerth India Private Limited, they told me for a full car it will cost me Rs. 2500 excluding installation charges. Is it worth it.

What is the full cost of damping using Dynamat??

what is the quantity of sheet will be used.....as mentioned by Wurth......

BUSA · 8th May 2007, 13:16

Quote:

Originally Posted by Rtech

huh! What are we missing here? What do they define full car as? And how come it's so cheap?

Full car = Four Doors + Boot + Roof + Floor.

I am wondering the same, how come its so cheap??

BUSA · 8th May 2007, 13:23

Quote:

Originally Posted by low_bass_makker

what is the quantity of sheet will be used.....as mentioned by Wurth......

Quantity of sheet quoted by him is 250 x 550 x 2mm - 6 pieces

Rtech · 8th May 2007, 13:28

2mm sheet? Isn't that extremely thin?

BUSA · 8th May 2007, 13:32

Quote:

Originally Posted by Rtech

2mm sheet? Isn't that extremely thin?

I was wondering the same, i asked him and he said that it is enough to damp the sound in the car and these sheets are specifically made for this purpose. What is the thickness of Dynamat and what is the cost of the same?

Rtech · 8th May 2007, 13:36

Awaiting the knowledgeable's to reply as to how the costings from Wuerth are so economical.

Bass&Trouble · 8th May 2007, 13:36

2 mm is not thin, guys. If you have the space for 9 mm, insert an MDF sheet.

BUSA · 8th May 2007, 13:43

Thanx LBM for the pics. What is the installation charge to do a whole car (Say a Swift) and how much did you get your Wurth for?? How many sheets did you use?? And how is the damping.

I have called the guy for a demo, he will be coming tomorrow, so will post more after seeing the demo.

Sam Kapasi · 8th May 2007, 13:45

Lol: how are you going to damp the whole car with 6 pieces of that?

Here is one sheet of American dynamic which we plan to use for one door, in red, vs, the size given by you of the wuerth, in yellow.

You will need about 3 boxes of that. Or Navin will need 6 boxes per car to achieve the same result.

low_bass_makker · 8th May 2007, 13:59

Sam Bhai is the sheet only 1.9812 mm thick.......

Rtech · 8th May 2007, 14:03

Hence my original question: What do they define full car as? Coz 6 sheets of that will not cover much area!

low_bass_makker · 8th May 2007, 14:08

Quote:

Originally Posted by BUSA

Thanx LBM for the pics. What is the installation charge to do a whole car (Say a Swift) and how much did you get your Wurth for?? How many sheets did you use?? And how is the damping.

Installation charges.....free....as I have DIY myself......Till now I have done the front two doors only....and I have used 3 feet x 1.5 feet (36 inch x 18 inch) two sheets per door......

I got it from B&T.....for how much.....that he can tell.....

very good.....and the sound is quite good and nice........

8th May 2007, 13:06	#137
BUSA Senior - BHPian Join Date: Aug 2005 Location: Bombay Posts: 5,130 Thanked: 20 Times View My Garage	Just spoke to Wuerth India Private Limited, they told me for a full car it will cost me Rs. 2500 excluding installation charges. Is it worth it. What is the full cost of damping using Dynamat?? Last edited by BUSA : 8th May 2007 at 13:08.
	() Thanks

8th May 2007, 13:28	#142
Rtech Team-BHP Support Join Date: Apr 2004 Location: Bombay Posts: 5,770 Thanked: 359 Times View My Garage	2mm sheet? Isn't that extremely thin?
	() Thanks

8th May 2007, 13:36	#144
Rtech Team-BHP Support Join Date: Apr 2004 Location: Bombay Posts: 5,770 Thanked: 359 Times View My Garage	Awaiting the knowledgeable's to reply as to how the costings from Wuerth are so economical.
	() Thanks

8th May 2007, 13:36	#145
Bass&Trouble Senior - BHPian Join Date: Mar 2006 Location: Bombay Posts: 2,754 Thanked: 124 Times	2 mm is not thin, guys. If you have the space for 9 mm, insert an MDF sheet.
	() Thanks

8th May 2007, 13:43	#146
BUSA Senior - BHPian Join Date: Aug 2005 Location: Bombay Posts: 5,130 Thanked: 20 Times View My Garage	Thanx LBM for the pics. What is the installation charge to do a whole car (Say a Swift) and how much did you get your Wurth for?? How many sheets did you use?? And how is the damping. I have called the guy for a demo, he will be coming tomorrow, so will post more after seeing the demo.
	() Thanks

8th May 2007, 13:45	#147
Sam Kapasi Distinguished - BHPian Join Date: Jul 2005 Location: Mumbai (but wat Posts: 6,997 Thanked: 2,378 Times View My Garage	Lol: how are you going to damp the whole car with 6 pieces of that? Here is one sheet of American dynamic which we plan to use for one door, in red, vs, the size given by you of the wuerth, in yellow. You will need about 3 boxes of that. Or Navin will need 6 boxes per car to achieve the same result.
	() Thanks

8th May 2007, 13:59	#148
low_bass_makker Senior - BHPian Join Date: Mar 2006 Location: Faridabad Posts: 6,815 Thanked: 305 Times View My Garage	Sam Bhai is the sheet only 1.9812 mm thick.......
	() Thanks

8th May 2007, 14:03	#149
Rtech Team-BHP Support Join Date: Apr 2004 Location: Bombay Posts: 5,770 Thanked: 359 Times View My Garage	Hence my original question: What do they define full car as? Coz 6 sheets of that will not cover much area!
	() Thanks