The Damping Material and Sound Deadener Thread

low_bass_makker · 3rd August 2007, 17:10

Quote:

Originally Posted by pmbabu

LBM,

Approximately 1500/- for 2 sheets.

Sir what is the size of the sheet and any weblink of the same...

pmbabu · 3rd August 2007, 17:38

LBM, sorry, I did not ask details about the size.

I browsed through though and found Scosche link:
Welcome to Scosche Industries

This is the only thing I found for Pyle:
DAMPING PRODUCTS (PYLE) - ( AUTOTOYS.COM )

low_bass_makker · 4th August 2007, 02:12

Quote:

Originally Posted by pmbabu

LBM, sorry, I did not ask details about the size.

I browsed through though and found Scosche link:
Welcome to Scosche Industries

This is the only thing I found for Pyle:
DAMPING PRODUCTS (PYLE) - ( AUTOTOYS.COM )

It all depends on how much you get for per square feet. this thread is all about it. Get that sizes for the shopkeeper and let us all know how much he is charging..

pmbabu · 4th August 2007, 22:18

Alright, the sheets are 12" x 12" and cost 1500/- for 2 sheets. It is called Accumat from the company Scosche.

low_bass_makker · 4th August 2007, 23:25

Quote:

Originally Posted by pmbabu

Alright, the sheets are 12" x 12" and cost 1500/- for 2 sheets. It is called Accumat from the company Scosche.

It means that one square feet is for Rs 750 which I think is very expensive for a damping sheet. Read the whole thread this is the purpose of the thread VFM damping not costly one...

http://www.team-bhp.com/forum/432304-post112.html
http://www.team-bhp.com/forum/444671-post209.html

pmbabu · 5th August 2007, 07:39

Quote:

Originally Posted by low_bass_makker

It means that one square feet is for Rs 750 which I think is very expensive for a damping sheet. Read the whole thread this is the purpose of the thread VFM damping not costly one...

http://www.team-bhp.com/forum/432304-post112.html
http://www.team-bhp.com/forum/444671-post209.html

. Should have read this thread in a whole first. Thanks, will be careful in future.

low_bass_makker · 5th August 2007, 08:04

Quote:

Originally Posted by pmbabu

. Should have read this thread in a whole first. Thanks, will be careful in future.

I think the purpose of the thread is successful. Contact Bass & Trouble or Sam Bhai for the same. And forget pyle shyle....

navin · 5th August 2007, 09:50

Quote:

Originally Posted by low_bass_makker

Contact Bass & Trouble or Sam Bhai for the same. ....

Clarification: Neiter Sam nor B&T represent American Dynamics. I have used AD for my Octy, my wife's Sail and my Mom's NHC. Not surprisingly the C needed the most.

In fact the metal panels of the NHC were so resonant I found that the Verna was better. Then I compared the Elantra to the Civic and found the Elantra was better. I hence feel that Hyundai seems to be doing a better job with damping. Anyone has other observations?

sk456 · 5th August 2007, 09:54

Well Santro is also from the Hyundai stable and its jsut terrible...although its a different segment altogether....

navin · 5th August 2007, 09:57

Quote:

Originally Posted by sk456

Well Santro is also from the Hyundai stable and its jsut terrible...although its a different segment altogether....

Yes the Santro is bad. The old Zen was better (in that segment).

nura · 5th August 2007, 11:15

Quote:

Originally Posted by sk456

Well Santro is also from the Hyundai stable and its jsut terrible...although its a different segment altogether....

How many sheets of Fonomat should I be looking at for damping my Santro?

sk456 · 5th August 2007, 12:53

Im afraid You needs lots... do not know how many sheets per se...but you will need a lot of trial and error beofre you are satisfied... I am yet to be... that feel of a well damped car jsut dos not coem in Santro......its awful really..

I think from what i remember I got the entire roof,doors,boot, etc covered....but that tin can feel is still there... I think im gonna get the floor done too....

low_bass_makker · 5th August 2007, 15:04

Quote:

Originally Posted by nura

How many sheets of Fonomat should I be looking at for damping my Santro?

At what price are you getting the fonomat sir...

nura · 5th August 2007, 15:46

2.25K for 10 sheets, Sir.

low_bass_makker · 5th August 2007, 15:51

Quote:

Originally Posted by nura

2.25K for 10 sheets, Sir.

sir what is the size of the sheets. is it 12 x 12 inches.

3rd August 2007, 17:38	#287
pmbabu BHPian Join Date: Sep 2005 Location: On The Net Posts: 335 Thanked: 47 Times	LBM, sorry, I did not ask details about the size. I browsed through though and found Scosche link: Welcome to Scosche Industries This is the only thing I found for Pyle: DAMPING PRODUCTS (PYLE) - ( AUTOTOYS.COM )
	() Thanks

4th August 2007, 22:18	#289
pmbabu BHPian Join Date: Sep 2005 Location: On The Net Posts: 335 Thanked: 47 Times	Alright, the sheets are 12" x 12" and cost 1500/- for 2 sheets. It is called Accumat from the company Scosche.
	() Thanks

5th August 2007, 09:54	#294
sk456 BHPian Join Date: Jun 2006 Location: @Noida/Gurgaon Posts: 570 Thanked: 7 Times	Well Santro is also from the Hyundai stable and its jsut terrible...although its a different segment altogether....
	() Thanks

5th August 2007, 12:53	#297
sk456 BHPian Join Date: Jun 2006 Location: @Noida/Gurgaon Posts: 570 Thanked: 7 Times	Im afraid You needs lots... do not know how many sheets per se...but you will need a lot of trial and error beofre you are satisfied... I am yet to be... that feel of a well damped car jsut dos not coem in Santro......its awful really.. I think from what i remember I got the entire roof,doors,boot, etc covered....but that tin can feel is still there... I think im gonna get the floor done too.... Last edited by sk456 : 5th August 2007 at 12:55.
	() Thanks

5th August 2007, 15:46	#299
nura BHPian Join Date: Feb 2007 Location: Kolkata Posts: 599 Thanked: 17 Times	2.25K for 10 sheets, Sir.
	() Thanks