[mohang_j]

Originally Posted by Technocrat

Mohang I am afraid you cant put a sub anywhere else than the boot. Try a combo of Sony amp & sub as this should be amongst the cheapest.

What about jbl 60 w*2 amp in gray iwas qouated 3100/-
jbl 12 inch sub woofer 2800/-
But how to confirm its genune product or duplicate.
and any concern about pioneer deh4750 (2nd hand)

[Technocrat]

What about costs for wiring(RCA + Power), antenna, Fuses. Also end hand stuff might work well or might not, you never know.

Your current costs are already at 6900 without wiring & HU costs + no warranty

[mohang_j]

My budget is excluding hu.can i use good quality teflon wires rated for 50 amps for power.

[sonic_boom]

Originally Posted by mohang_j

My budget is excluding hu.can i use good quality teflon wires rated for 50 amps for power.

teflon wires ??? never heard of these . I thought wires were made of copper !

[mobike008]

Originally Posted by sonic_boom

teflon wires ??? never heard of these . I thought wires were made of copper !

They must be Teflon coated copper wires

[Sam Kapasi]

Originally Posted by sonic_boom

teflon wires ??? never heard of these . I thought wires were made of copper !

They are made of copper, silver etc that are excellent conductors.
Teflon (polytetrafluoroethylene) is an excellent dielectric. This means insulation. So a teflon wire might be a copper wire that is coated with teflon. I suppose.

[DerAlte]

Originally Posted by sonic_boom

teflon wires ??? never heard of these . I thought wires were made of copper !

TEFLON-coated wires. The conductor is copper, the insulation is dual layer PVC+PTFE. Can take more overload without the insulation degrading fast.

[mohang_j]

Originally Posted by sonic_boom

teflon wires ??? never heard of these . I thought wires were made of copper !

Hey sonic_boom,
Teflon wires have their skin made up of teflon (hardest+high temp resistive 160+deg cel.nylon, typical applications are at your kitchen ie.non stik tava,teflon coating for underboady in cars and ..endless) wires are made up of silver coated copper. Teflon is one of the hardest form of nylon.They are widely used in electrical+electronics to carry high current @smaller surface area.

May be u can check in www.teflon.com

[mohang_j]

Originally Posted by Sam Kapasi

They are made of copper, silver etc that are excellent conductors.
Teflon (polytetrafluoroethylene) is an excellent dielectric. This means insulation. So a teflon wire might be a copper wire that is coated with teflon. I suppose.

Yes Sam,
Thickness of Teflon wires (ie teflon instead of normal pvc skin) will be verry less compared to normal pvc wires (Finolex) at given current handling capacity. It will be verry easy to bring them inside the car from attery.

[Eddy]

Can anyone please tell me what is the max volume that can be attained in a Pio 4050 ? I saw my friend go upto 40 but wanna know whats the max/

[adityamunshi]

its 62 in my Pio 6950

[binoyb22]

whats the best audio set up for getz prime.

My requirement is very simple

Audio should be crystal clear.
Should have all the latest facilities in the head unit(like ipod connection,USB port etc).
Display colour of head unit should be white and not blue.

[amit_mechengg]

can a jbl 1264 run on /jbl 75.4 Amp. how to power it?

[bIte tHe bulLet]

yo dudes...

tell me what you think...

soundstream pca 4.400 4 channel amp
morel tempo 6 1/2" components in front
blau gtc 172 6" components in rear
blau gtt 300 bass tube
pio 5050 hu
kicker power cable
kicker speaker cable
jbl rca's

smile and stay safe... cheers:

[tush]

Originally Posted by bIte tHe bulLet

yo dudes...

tell me what you think...

soundstream pca 4.400 4 channel amp
morel tempo 6 1/2" components in front
blau gtc 172 6" components in rear
blau gtt 300 bass tube
pio 5050 hu
kicker power cable
kicker speaker cable
jbl rca's

Why havent you chosen a Blua HU..???